Nomads Audio ApS BRIN Benutzerhandbuch

BRINGone

Portable Bluetooth Speaker

95.0 mm

95.0 mm

2

This product is in compliance with the essential requirements and other relevant 

provisions of Directive 2014/53/EU. The declaration of conformity may be consulted at: 

www.nomadsaudio.com/declaration-of-conformity/bringone

3

This product is designed with full attention for safety performance. To 
ensure safe operation, please follow the following rules:
1.  Place the speakers in a stable position avoid fall and cause damage or 

personal injury.

2.  Do not drop, disassemble, open, crush, bend, puncture or burn the 

speaker.

3.  Do not place close to any heat source (such as radiators, heating 

equipment, stoves, or other heat-generating equipment).

4.  Please send to a professional maintenance 

 to repair the speaker 

for any reason damaged.

5.  Before wiping with a dry cloth to clean the speakers, set the power 

switch to the   position and unplug the power cord from the power 
outlet.

6.  Health considerations, please adjust the sound to a suitable level.

Read all instructions
Only charge with devices rated and marked with 5V to avoid damage to the 
speaker.
Do not open up the speaker, it voids the warranty and may damage the 
product.
Rechargeable batteries have a limited number of charge cycles.
Battery life and number of charge cycles varies by use and settings.
Never place the speaker close to high temperature heat sources.
To keep the warranty valid, never try to repair the product yourself.

4

•  1 x Wireless speaker 
•  1 x Product manual 
•  1 x Micro USB cable

AUX IN

RESET

USB

LED

TF

1

5
3

4

2

1.  Wrist strap.
2.  Power button.

•  Press and hold the power 

button for about 3 seconds to 

power the speaker on or 

3.  Next song / Increase Volume
4.  Previous song / Decrease 

Volume

5.  Multi-function button:

•  Multi-function button, is 

shortened to “MF button” in 
this manual.

AUX IN

RESET

USB

LED

6 7 8

9

6.  3.5 mm AUX input
7.  USB charge port
8.  Charging LED

•  The LED indicates the battery 

status Red LED is lit:

•  Charging 

 / No LED: Fully 

charged and/or powered 

9.  Reset

7

2.  Short press the multifunction 

key to answer the call on the 
speaker, you can talk to each 
other through the microphone, 
after a call ends, BRINGone will 
continue to play music.

3.  Long press the multifunction 

key on the speaker to reject an 
incoming call.

4.  When you connect your phone, 

press twice rapidly on the 
multifunction key to call back 
the last number called on 
theconnected telephone.

•  Model: BRINGone
•  Speaker: Ø40mm 4Ω 5W x 2
•  Charging time: 2.5 hours
•  Input: 5.0V 1.0A
•  Product Weight: 295g
•  Bluetooth: 4.2+EDR compliant
•  Built-in rechargeable battery: 

Li-on, 3.7V, 2200mAh

•  Playing time: 12 hours
•  Product Size: 168 x 90 x 

40mm

•  Range: Up to 10m
•  IPX5

1.  Turn on both speakers
2.  Press and hold the Play/Pause-

button on one of the speakers 
for about 2 seconds until you 
hear a “beep” sound.

3.  Release Play/Pause button. It 

can take a few more seconds 
before the speakers connect to 
each other.

5

A built-in rechargeable battery 
powers the speaker.

Connect the supplied charging 
cable to the charge input and to 
a USB port on your computer or 
a USB charger. The charging LED 
is lit red during charging. The 
LED turns   when fully charged.
It is recommended to charge 10 
minutes before powering on if 
not used for 7 days, then you can 
continue to use BRINGone while 
charging.

•  Power on: Long press power 

on the speaker, then the 
Bluetooth indicator light 
is on and you can connect 
Bluetooth devices.

•  Power 

 Long press power 

on the speaker, and then 
the Bluetooth indicator will 
turn 

On your device search for Bluetooth 
devices. Select “BRINGone” from 
the list. The speaker will give 
an indication sound when the 
connection is successful. Only one 
Bluetooth device can be connected 
at the same time. If you want to 
connect another device to the 
speaker, then

disconnect the

current one.

On your device, disconnect the 
Bluetooth connection with the 
speaker.

6

Some Bluetooth devices support 
automatic reconnection, with 
those devices the speaker will 
automatically reconnect.
The speaker will not automatically 
reconnect on devices that does not 
support automatic reconnection.

Power the speaker on.
Connect a 3.5 mm audio cable to 
the speaker and your device.
The speaker is now connected to 
your device.

•  Short press on the MF-button.

When listening to music

•  Increase volume: Short press 

on the “+” button.

•  Decrease volume: Short 

press on the “-“ button.

•  Previous song: Long press on 

the “-” button.

•  Next song: Long press on the 

“+” button.

•  Increase volume: Long press 

on the “+” button.

•  Decrease volume: Long press 

on the “-“ button.

1.  Connect your phone via 

Bluetooth, the speaker will 
play ringtones when a call is 
incoming.

8

4.  Go into the Bluetooth menu on 

your smartphone and pair the 
speakers with your phone by 
selecting the speaker model 
number (it will only display 
1 number which is both 
combined in to one).

Press and hold the Play/Pause-
button on one of the speakers for 
about 2 seconds until you hear a 
“beep” sound

When speakers are previously 
paired with each other:
If they do not automatically pair 
with each other when you turn 
them on, press and hold the 
Play/Pause button on one of the 
speakers for about 2 seconds. 
It can take a few more seconds 
before the speakers connect to 
each other. If you are connected 
to both speakers without the TWS 

connection between them, then you 
have to disconnect from one of the 
speakers.

EXPLANATION
1.  The   symbol indicates: The 

product is only suitable for the 
safe non-tropical climates.

2.  Note: Please use the same 

type or equivalent type of 
battery to replace if the battery 
is scrapped. Otherwise an 
explosion may occur.

3.  The lithium battery may not be 

exposed to 

 or excessive 

heat.

9

First fault: connection failed.
Solution:
1.  Please check whether the 

multifunction indicator light 

 blue. Please power on 

your speakers if the light isn’t 
on. Please charge the speaker if 
the light is still not on.

2.  Please turn   the other 

Bluetooth devices, if there 
are many Bluetooth devices 
surrounding. This may result in 
search 

3.  Restart wireless speaker on 

devices for Bluetooth search 
function.

Second problem: The music player 
sound breaks.
Solution:
1.  View the distance between the 

player and the speaker. the 
Bluetooth connection distance 

is about 8-12meters.

2.  Ensure there is not any 

obstacle between the play 
device and the speakers.

3.  Check the playback device or 

whether the speaker is in a low 
power state.

The speaker does not turn on?
Recharge your speaker.

does not respond?
Reset your speaker.

•  Adjust the volume.
•  Make sure that your 

Bluetooth device is within 
range.

•  Ensure there is no obstacles 

in the way that can block/
disturb the signal.

•  Check via the device’s 

Bluetooth connection if the 
speaker is connected with 
the device.

10

There is poor sound quality?
Move the device closer to the 
speaker or try removing obstacles 
between them.

Cannot connect the device with the 
speaker?
Disconnect other connected 
devices and then try again. You can 
force a disconnection by moving 
out of Bluetooth range (8-12 m).

 

 

   

 

 

   

 

 

11

 

 

 

 

 

 

 

   

 

 

 

 

 

     

 

 

 

Product Name: Bluetooth Speaker
Model No.: BRINGone
FCC ID: 2AQT3-BRIN