shenzhen kaixun electronics co. ltd OUTLET Benutzerhandbuch
UK\G즊
75*100mm
Model:KX-XS-US-005
3.1
3.1
04
Point your phone’s camera at this code
or search your phone’s app store for “Smart life”
About this product
This innovative product makes it easy to add
smart features to your home. Installation is easy
using the dedicated Smart life App, and you can
control the product using
Amazon
Alexa&Google home.
This product combines smart outlets, USB charging,
to transform a simple power socket into an
intelligent power management system that uses
your home’s own Wi-Fi (2.4GHz) signal.
Power/Reset Button
Before starting, turn off the circuit breaker and test to make sure
there is no power through the line.
Remove old outlet if necessary. Then, connect the new outlet as
shown above.
Attach the outlet using the included screws.
Insert the faceplate carefully, making sure the prongs on the
faceplate line up with the slots on the outlet.
Attach the faceplate with the short screws provided.
Turn on the breaker and test the outlet thoroughly.
How to Use This Outlet
How to Use This Outlet
1. Basic Installation
Open the app. You should see the outlet in the device list. Tap to
configure the outlet.
2. Wi-Fi Connection
Your phone must be connected to your home Wi-Fi network to
configure the outlet.
Press the power button on the outlet itself. The light should flash
quickly. If it doesn’t, press and hold the power button for 5
seconds.
On the app, press the “ADD DEVICES” button and choose the
Electrical outlet.
Tap the button that says “CONFIRM INDICATOR RAPIDLY
FLASHING. Then, enter your Wi-Fi password.
It can take up to a minute for the configuration to complete.
Enter a name for the outlet (like ”Living Room”) to finish the
installation.
3. Operation
Tap the name of the outlet (like “Living Room”) in the device list
to control it.
Tap “USB” to turn on power to the USB ports.
Tap “AC outlet” to turn on power to the outlets.
Tap “Main Switch” to turn the entire outlet on or off.
Tap “Timing” to set a schedule for this outlet.
KX-XS-US-005
Launch the Alexa app on your phone.
Select”Skills”in home menu of Amazon Alexa.
Type(Smart life)on search window and find.
Click on the App(Smart life) and press ENABLE to link Alexa.
06
Adding an Alexa Skill
Once the Smart life App has been linked to Alexa, you can
control any function of your outlet.
Note: if you have renamed
the outlet in the Smart life app, it may not appear in the Alexa
app unless the Alexa app can recognize the name.
device name
Smart life
Electrical outlet
Smart life
The following voice commands are supported.
1: Alexa,turn on the (
USB
).
Alexa,turn off the (
USB
).
2: Alexa,turn on the (
outlet
).
Alexa,turn off the (
outlet
).
3: Alexa,turn on the (
device name
).
Alexa,turn off the (
device name
).
Google home
Tap "Home Control" in the hamburger menu on the Google Home
app's home page, then tap "+".
Find "Smart Life" in the list. In the new window, select your Smart Life
account’s region, type your Smart Life account and password, then
tap "Link Now". After you assign rooms for devices, your devices will
be listed in the Home Control page.
Control your smart devices through Google Home
The following voice commands are supported.
1: Ok Google, turn on (
USB
).
Ok Google, turn off (
USB
).
2: Ok Google, turn on (
outlet
).
Ok Google, turn off (
outlet
).
3: Ok Google, turn on (
device name
).
Ok Google, turn off (
device name
).
Now you can control your smart devices through Google Home
08
07
09
10
11
5007995
Dual USB WIFI Smart Outlet
24 months,
On/Off the socket
Power on the device and confirm that indicator light rapidly
blinks(2 times/second)
If the indicator light not blink(2times/Second):Please hold reset button
5Seconds
BACK WIRING
(Recommended)
05
1.Warning::Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user’s authority to operate the equipment.
2.NOTE: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
NOTE
This equipment should be installed and operated
with a minimum distance of 20 centimeters
between the radiator and your body.
User Manual