Essence SmartCare Ltd ES700VPDMH Benutzerhandbuch
Installing with Screws
22
Care@Home™ Voice Panic Detector User Guide
Appendix B
Installing with Screws
You can install the VPD on a wall with screws. The back cover of the VPD serves as the mounting-base.
Installing with screws:
Allows more flexibility in choosing installation locations
Can reinforce the tape installation especially in a wet or moist location
Prepare the following equipment:
A drill with a standard, appropriate bit
Two 3 X 35 DIN 7982 C screws and wall anchors – not provided
A standard Philips screwdriver
The mounting-base has two holes. One is the tamper pin, triggering a tamper event if the VPD is
disturbed.
disturbed.
The rubber seal covering the holes is for waterproofing the VPD. The seal allows you to screw through
the holes and retain the waterproofing capability.
the holes and retain the waterproofing capability.