Kinetico KNTSYSHUB3 Benutzerhandbuch
Kinetico SysHub
November 23, 2018
Copyright © 2018 Kinetico
Page |
10
Antenna 2: Chip antenna
Flash
8MB
Operation Buttons
1x User input (Wi-Fi Provisioning)
1x Factory reset
1x Power On/Off
1x Factory reset
1x Power On/Off
Status Indicator
1x RGB LED
Operating System
FreeRTOS
Certification:
FCC, IC
Operating
Temperature
Temperature
0C to 45C
Storage Temperature -20C to 45C (Driven by battery specifications)
Operating Humidity
10%~90%RH (Non-condensing)
Storage Humidity
10%~90%RH (Non-condensing)
Enclosure
Dimensions (in mm)
Dimensions (in mm)
92 x 35 x 90 mm (L x W X H)
Weight (in g)
90gram
Table 4 - Kinetico SysHub specifications
Note: The Primary source of power is Adapter and battery is only used for backup when primary
source is not present.
source is not present.
3.4 Protocol & Security Support
The SysHub contains a full-featured wireless software stack:
• AP and Station Mode for Wi-Fi
• ZigBee
• WPA/WPA2 Personal
• ZigBee
• WPA/WPA2 Personal
3.5 Wi-Fi Addresses and Port Numbers
3.5.1 Hardware Address
The hardware address of Wi-Fi is also referred to as the physical address, or MAC address. Sample ways
hardware address may be represented:
hardware address may be represented:
• 00-80-A3-14-1B-18
• 00:80: A3:14:1B:18
• 00:80: A3:14:1B:18
3.5.2 Port Numbers
Every TCP connection is defined by a destination and source IP Address, and a destination and source
port number. For example, a Telnet server commonly uses TCP port number 23.
The following is a list of the default server port numbers running on the Kinetico SysHub:
port number. For example, a Telnet server commonly uses TCP port number 23.
The following is a list of the default server port numbers running on the Kinetico SysHub:
• TCP Port 443: HTTPS (Web Manager Configuration)
• TCP Port 80: HTTP (Web Manager Configuration)
• TCP Port 80: HTTP (Web Manager Configuration)