Kinetico KNTSYSHUB3 Benutzerhandbuch
Kinetico SysHub
November 23, 2018
Copyright © 2018 Kinetico
Page |
15
4.4 User Interface Switch
The Kinetico has three below user interaction switch:
Figure 9 – SysHub switch details
1. Wi-Fi Provisioning Button: Use to put Wi-Fi in provision mode and press for 5 seconds to reset Wi-Fi
credentials.
2. Factory Reset: To reset the SysHub by 15-second-long press. It is also used to reboot the system without
removing power supply. Pressing the switch will drive logic zero on RESET signal, which will affect every
module on SysHub.
3. Power ON/OFF Switch: To ON and OFF the power of Kinetico SysHub.
credentials.
2. Factory Reset: To reset the SysHub by 15-second-long press. It is also used to reboot the system without
removing power supply. Pressing the switch will drive logic zero on RESET signal, which will affect every
module on SysHub.
3. Power ON/OFF Switch: To ON and OFF the power of Kinetico SysHub.
4.5 User LED Indications
Single RGB LED is used to provide indication about different SysHub functionality.
Below table indicates color mark to represent specific events.
LED indication
Primary Supply
Secondary Supply
Red
No Wi-Fi Connection
No Wi-Fi Connection
Red Blinking
No Internet Access
No Internet Access
Blue
System is OK
NA