YELLOW KEY SUPPLY YKS004 Benutzerhandbuch
Vehicle remote control manual
1 cautions
1.1 During storage and use, the modules should be kept dry and clean, free of dust, dirt, oil stains
and mold, and should not be exposed to acid, alkaline, salt spray and humid air for a long time.
The 2 button function has
Unlock, lock, tail box, look for
3 disassembly and debugging methods
Open the enclosure and install a 2032 button battery. The positive and negative polarity can not
be reversed. Press any key and the indicator flashes to indicate that it can be used properly. Note:
some have no indication lights.
4 functional parameters
Working distance, different from the root working environment, ranging from 20 meters to 100
meters; working frequency: 315 MHZ
Voltage: 3V (section 2032 battery)
Current: 10MA
Power: 10MW
1.1 During storage and use, the modules should be kept dry and clean, free of dust, dirt, oil stains
and mold, and should not be exposed to acid, alkaline, salt spray and humid air for a long time.
The 2 button function has
Unlock, lock, tail box, look for
3 disassembly and debugging methods
Open the enclosure and install a 2032 button battery. The positive and negative polarity can not
be reversed. Press any key and the indicator flashes to indicate that it can be used properly. Note:
some have no indication lights.
4 functional parameters
Working distance, different from the root working environment, ranging from 20 meters to 100
meters; working frequency: 315 MHZ
Voltage: 3V (section 2032 battery)
Current: 10MA
Power: 10MW
FCC Warning Statement
Changes or modifications not expressly approved by the party responsible for compliance could
void the user’s authority to operate the equipment. This equipment has been tested and found to
comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
‐‐ Reorient or relocate the receiving antenna.
‐‐ Increase the separation between the equipment and receiver.
‐‐Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
‐‐ Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could
void the user’s authority to operate the equipment. This equipment has been tested and found to
comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
‐‐ Reorient or relocate the receiving antenna.
‐‐ Increase the separation between the equipment and receiver.
‐‐Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
‐‐ Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that m
ay cause undesired operation.
two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that m
ay cause undesired operation.
Test Model：YKS-004-1516