Shanghai WGCVS Power Tech Co. Ltd. 600-9999 Benutzerhandbuch
SHANGHAI WGCVS POWER TECH CO., LTD Sales@wgcvs.com
Electronic Hub Odometer User Guidance
How It works
WGCVS® is an advanced mileage counter that monitors the earth’s gravity for recording wheel revolutions. The gravity acceleration
directions and values are collected and then calculated by the MCU to come out of the revolutions of the wheel. With the tire size
information inputted, the MCU work out the mileage of the wheel and show it with an LCD display
directions and values are collected and then calculated by the MCU to come out of the revolutions of the wheel. With the tire size
information inputted, the MCU work out the mileage of the wheel and show it with an LCD display
.
Program the Unit
The unit is shipped from the factory with a Revs/Mile value of 999.9.
This display indicate that the unit has NOT been programmed.
It must be programmed before you use it for mileage recording.
WGCVS electronic hub odometer does not need a dedicated programmer. Any intelligent communication equipment, with Bluetooth 4.0
(or above) can be used as a programmer.
This display indicate that the unit has NOT been programmed.
It must be programmed before you use it for mileage recording.
WGCVS electronic hub odometer does not need a dedicated programmer. Any intelligent communication equipment, with Bluetooth 4.0
(or above) can be used as a programmer.
⚫
Step 1: download and install the APP “WGCVS Hub Odometer”
Find this APP at the APP store on your cellphone and install it on your cellphone. (Figure 1)
⚫
Step 2: Select job
Normal Set：This is for programming of a new unit
Batch Set： For same tires, use the “Batch Set” menu to set all units at one time
Clear Trip： Mileage and Start a new trip，Trip mileage can be reset any time to start a
Batch Set： For same tires, use the “Batch Set” menu to set all units at one time
Clear Trip： Mileage and Start a new trip，Trip mileage can be reset any time to start a
new trip by activating the Bluetooth of the unit and the “Clear Trip “menu
⚫
Step３: Data Settings
Unit
：KM or Miles (This selected unit will apply for both Life miles and Trip miles). (Figure 2)
Staring Mileage：
Set the mileage to match the current mileage of the vehicle the unit will be mounted to. (Figure 3)
Tire:
For the utmost accuracy, set the tire by REVs/Mile or REVs/KM (preferred). Or select the tire size which are stocked
at the APP database. (Figure 4)
⚫
Start Set:
Keep your cellphone Bluetooth turned on (No pairing needed). And then activate the odometer by pushing the button for 2 seconds. The
Odometer ID showing on the cellphone which means the Bluetooth is activated and ready for programming. Select the Part on your
cellphone. Once “Syncing Succeeded”, touching the button for 2 seconds to quit Programming mode.
Odometer ID showing on the cellphone which means the Bluetooth is activated and ready for programming. Select the Part on your
cellphone. Once “Syncing Succeeded”, touching the button for 2 seconds to quit Programming mode.
Figure 1
Figure 2
Figure 3
Figure 4
W G C V S
®
Activate the Part ID (Programming)
mode by touch for 2 seconds