Alco Electronics Ltd RS2929B Benutzerhandbuch

EN - 4

You can charge your smartphone/tablet through the USB socket with a USB cable (not supplied).

Connect a USB cable (not supplied) to the USB socket on the back of the unit and the dock connector on your 

smartphone/tablet.

You can connect audio devices such as your CD player or MP3 player to the unit via the LINE IN jack. To do this, 

connect an audio cable from the line out or headphone out jack of the other audio device to the LINE IN jack on 

the back of unit.  Press the 

 

SoURcE button to switch to AUX mode.

Note :  We recommend you unplug the device from the LINE IN jack when not in use.

Setting the clock can only be done in STANDBY mode.

•  If the unit is plugged in with the supplied AC adapter and the unit is in standby mode.

1.  Press and hold the 

/PRoG/MEM button until the hour digits blink.

2.  Press the 

 or 

 button to adjust the desired hours and press the  /PRoG/MEM button once to confirm, 

then the minute digits blink.

3.  Press the 

 or 

 button to adjust the desired minutes and press the  /PRoG/MEM button once to start 

clock.

Press the 

 

SoURcE button to switch to TUNER mode. 

•  Press and hold the

 or 

 button until the tuner starts searching for a station, then release. After tuning in 

a station, the search stops.

1.  Tune in to a desired station. Press the 

/PRoG/MEM button. 

2.  The preset number will blink and the “MEM” indicator will be shown on the display.

3.  Press the 

/MEM.UP button to select the preset number.

4.  Press the  /PRoG/MEM button again to store it in memory.
Tuning in to a Preset Station

Press the 

/MEM.UP button to select a preset number.

Note : Do not connect the FM antenna to an outside antenna.

   When the reception is good, the “ 

 ” icon will appear on the display.

Connect the speakers to the R terminal and the L terminal.

NoTE : Connecting speakers other than the speakers supplied with the unit may damage the unit

Using an AC adapter other than the one supplied with the unit may damage the unit. This AC adapter operates 

on AC 100V-120V ~ 50/60Hz.
caUTIoNS:

•  Before use, ensure the rated voltage of the adapter matches your local voltage.

•  Using an AC adapter other than the one supplied with the unit may damage the unit.

•  The included AC adapter is for use with this unit only. Do not use it with other equipment.

•  If you are not going to use the unit for a long time, disconnect the AC adapter from the wall outlet.

•  Whenever the AC adapter is plugged in to a wall outlet, electricity is running through the unit, even when the

power switch is turned off.

RS2929B_IB_E&S&F_W041.indd   4

2016/5/4   16:25:33