Coollaboratory Liquid MetalPad MPAD-1G Benutzerhandbuch
Produktcode
MPAD-1G
All company and product names may be trade names,
Press: presse@coollaboratory.com
trademarks or registered trademarks of the respective owners.
Internet: http://www.coollaboratory.com
Attention: Be sure that your computer system is disconnected from its power source
if you want to work with your computer hardware!
Non-observance can cause a danger to life!
Installation
In normal case there is a heat-conductive paste or a heat-conductive pad between the CPU cooler
and the processor. Non-metallic heat-conductive paste has the disadvantage that it cannot transfer the
generated heat from the source to the cooler completely. Remove the old heat-conductive paste or
heat-conductive pad from the cooler and processor. The surfaces have to be free of fats and residues.
Particularly suitable are cleaning cloths, for example for cleaning glasses.
If you have used
former the Coollaboratory Liquid Pro, we recommend a metal grinding pad
– for
example from “Scotch-Brite” – or metal finish (polish).
Please check the area of contact measures after cleaning the surfaces of the processor and cooler.
The measures delivered by Coollaboratory are:
Please check the area of contact measures after cleaning the surfaces of the processor and cooler.
The measures delivered by Coollaboratory are:
38x38 millimeters for processors
20x20 millimeters for graphic cards
There are size differences between the CPU / graphic card manufactures and product families. It is
always possible, to customize the MetalPad with a cutting tool.
The Liquid MetalPad should have the same dimensions as the contact area.
Put one Liquid MetalPad on the processor and then install the cooler on the processor. Please be sure
to position the cooler on the processor correctly. Do not rotate or shift the installed cooler, otherwise
the position of the Liquid MetalPad could change.
Now choose one of the following installation methods that match your requirements.