Nocs AB NS2N Benutzerhandbuch

1.  Switch on the NS2.

2.  The LED flashes green quickly for about 30 seconds 

while booting up. 

3.  The LED flashes green slowly indicating that the NS2 is 

ready for setup.

4.  Press and hold the “Setup” button for five (5) seconds. 

The LED flashes green and blue slowly indicating that the 

NS2 has entered manual setup mode.

5.  Connect your Mac, PC or iOS device to the “NOCS_NS2_

Setup“ wireless network.

6.  Open “http://192.168.1.1” in a browser.

7.  If you wish to change the name of the NS2, type in the 

selected name in the “AirPlay device name” box and click 

“Update”, then return to the “Network Configuration”.

8.  Select the wireless network (SSID) to which the NS2 

should be connected and enter the network password. 

Use “Advanced” settings if needed. Press “Apply”.

9.  The LED flashes green quickly while the NS2 is rebooting, 

followed by flashing green slowly while connecting. 

10.  The LED turns solid green followed by a beep to indicate 

that the NS2 is connected to the wireless network.

11.  Reconnect your Mac, PC or iOS device to your wireless  

network again.

 ⋅ It is recommended that the DHCP checkbox remains 

checked.

 ⋅ In areas with a lot of Wi-Fi interference, connecting to 

the NS2 wireless network sometimes requires more than 

one attempt.

 ⋅ The NS2 supports DHCP and will automatically  

re-connect to the wireless network after the first-time 

setup.  

 ⋅ Moving the NS2 to a new wireless network or changing  

the wireless network settings requires a new setup.

Once the setup is finished, the NS2 can be fully operated from 

a Mac, PC, iOS device, Android or WP8.

A Mac or PC can output audio from iTunes by selecting the 

NS2 from the device menu in the bottom right corner of the 

program window. 

In order to connect with NS2 make sure that the speaker is 

paired with the device. If connecting for the first time, select 

Nocs NS2 from the list of devices in the Bluetooth® settings.

To pair manualy:

1.  Power the NS2 on and press and hold the “Setup” + 

“Source” button until the LED flashes red/green/blue.

2.  Enable the Bluetooth® feature in the device that NS2 is 

pairing with, and scan or search to display Nocs NS2.

3.  If necessary, approve the pairing and connection by 

selecting the Nocs NS2 from the list of available devices.

4.  Once paired, the LED turns blue.

An iPod touch, iPhone or iPad can output audio from any 

application that supports the standard iOS volume controls by 

selecting the NS2 from the AirPlay symbol next to the volume 

control.

Connect your device to your home wifi 

 ⋅ Follow your device’s user manual to connect it to your 

home  wifi  network. All  devices  need  to  be  on  the  same 

wifi.

Get the Spotify app/Premium free trial

 ⋅ Download the Spotify app for your mobile or tablet from 

your app store, and take the Premium free trial. Log in to 

Spotify and start playing a track.

Play millions of songs on your speakers

 ⋅ To start with, your mobile and speaker need to be on the 

same wifi. Tap on the Now Playing bar to reveal extra con-

trols, and select the speaker icon. Just choose your new 

device and it’ll start playing.

 ⋅ The NS2 automatically switches to AirPlay when an audio 

stream is detected. 

 ⋅ The AirPlay connection overrules the AUX connection, 

meaning the AirPlay connection needs to be turned 

off from the Mac, PC or iOS device before the AUX 

connection can be activated. 

 ⋅ Press the “Source” button and the LED turns cyan. 

 ⋅ Now connect your device with the 3.5 mm aux input and 

play music through your media player.

The latest firmware is available from the Support section* 

at the Nocs web site. To update the firmware, please follow 

below steps. 

1.  Open the AirPlay IP address in a browser. Please see the  

router manual for instructions on how to retrieve IP 

addresses. For AirPort Express open AirPort Utility > Select 

the AirPort Express > Advanced > Logs and Statistics > 

DHCP Clients and locate the NS2 in the list of clients. 

2.  Select “Firmware update”.

3.  Select “Proceed”.

4.  Await the 30 seconds countdown, the page will 

automatically refresh once finished.

5.  Locate the firmware update file on your hard drive.

6.  Select “Upload”. 

7.  Select “Proceed” to upload the firmware file. The page 

will automatically refresh to display the current status 

during update.

8.  Select “Close” to close the setup page.

 ⋅ In some cases the NS2 needs to be setup again after the 

update is finished.

 

*

Http://www.nocs.se/pages/support

To reset the NS2 to factory settings, please follow below 

instruction.

1.  Switch on the NS2.

2.  The LED flashes green quickly for about 30 seconds 

while booting up. 

The Nocs NS2 Air Monitors are a set of active speakers with 

AirPlay, Spotify Connect and Bluetooth technology allowing 

you to stream music wirelessly from your Mac, PC, Android, 

WP8, iPod touch, iPhone and iPad. Turn your device into the 

ultimate music experience and enjoy the 

powerful sound from the NS2.

The NS2 has three different wireless connection technologies, 

AirPlay, Spotify Connect and Bluetooth®. So you can stream 

your music seamless from your device of choice directly to 

the NS2.

AirPlay is a revolutionary technology that lets you stream 

music wirelessly from your Mac, PC or iOS device.

All the power of Spotify, built-in.

 ⋅ Spotify is the world’s most popular streaming service. If 

you subscribe to Spotify Premium, you can control your 

new speaker with your phone or tablet. Because Spotify is 

built-in to your speaker, you can still take calls or use other 

apps  - the music never stops.

Try Spotify for free

 ⋅ To try Spotify Premium free for 30 days, or learn more 

about Connect, please go to spotify.com/connect

®

Bluetooth® is a universal pairing technology featured on iOS, 

Android and WP8.

The NS2 has been designed to offer a simple and convenient 

AirPlay and Bluetooth solution. 

When unboxing the NS2 for the first time, it is advised to get 

familiar with the product. After unboxing the NS2, the power 

supply needs to be connected to the right speaker and the 

two speakers connected to eachother using one of the two 

supplied speaker cables.

 ⋅ Switch on the NS2 by pressing the “Power” button 

located on the right speaker’s rear panel. 

 ⋅ If the NS2 has not been setup before, the LED flashes 

green quickly for about 30 seconds while booting up, 

followed by flashing green slowly to indicate that the NS2 

is ready to be setup.

 ⋅ If the NS2 has already been properly setup, the LED 

flashes green quickly for about 30 seconds while booting 

up, followed by flashing green slowly for 5 seconds. 

When the LED turns solid green followed by a beep, the 

NS2 is connected to the wireless network. 

 ⋅ To switch off, press the “Power” button.

When the NS2 has been without signal from any of the audio 

inputs for 20 minutes it will enter standby mode. The LED 

turns solid red, and can be reactivated by just sending a 

singal from your device.  

See separate table.

There are 3 different ways to setup your speakers to the WiFi 

network. Please choose the most convenient one for you. 

If you want to use your NS2 with Bluetooth please go to 

section 4.2

1.  Switch on the NS2.

2.  The LED flashes green quickly for about 30 seconds while 

booting up.

3.  The LED flashes green slowly to indicate that the NS2 is 

ready for setup. 

4.  Connect your iOS device to the Service port with USB 

cable

5.  Press the “Setup” + “Source” button, the LED will flash 

red/green/blue 

6.  Allow your device to share your WiFi settings to connect 

the NS2 to the WiFi network.

7.  The LED turns solid green followed by a beep to indicate 

that the NS2 is connected to the wireless network.

1.  Download the Nocs NS2 Air Monitor app on the App Store

2.  Switch on the NS2.

3.  The LED flashes green quickly for about 30 seconds while 

booting up.

4.  The LED flashes green slowly to indicate that the NS2 is 

ready for setup. 

5.  Press the “Setup” button on the right side speaker’s rear 

panel for five (5) seconds, the LED will flash green and 

blue to indicate the WiFi setup is ready to begin.

6.  Open the Nocs NS2 Air Monitor app on your iOS device 

and follow the simple guide to set-up your NS2 speakers 

to the WiFi network.

1.  Download the Nocs NS2 Air Monitor app on Google Play

2.  Switch on the NS2.

3.  The LED flashes green quickly for about 30 seconds while 

booting up.

4.  The LED flashes green slowly to indicate that the NS2 is 

ready for setup. 

5.  Press the “Setup” button on the right side speaker’s rear 

panel for five (5) seconds, the LED will flash green and 

blue to indicate the WiFi setup is ready to begin.

6.  Open the Nocs NS2 Air Monitor app on your Andoid 

device and follow the simple guide to set-up your NS2 

speakers to the WiFi network.

Make sure you know the name and password of your wireless 

network before you start. If your wireless router supports 

WPS, go to section 3.2. 

04 / EN

EN / 05