CE LINK LIMITED K6 Benutzerhandbuch
Before Using the APP and Sport, make sure your phone
meets the following requirements:
IOS 9.0 and above and support Bluetooth 4.0,
Android 4.3 and above.
meets the following requirements:
IOS 9.0 and above and support Bluetooth 4.0,
Android 4.3 and above.
Strap on your Celink Sport, and begin a fashion journey.
03
01
02
04
05
08
09
06
Activation:Single press the side button/when plugged into power
source for charging.
Lock screen/back to last page:Single press the side button.
11
PMOLED
0.96”
128*64
Touch Screen+Button,(Support Lift wrist, bright screen)
BLE 4.2
3 Axis G Sensor
YES
YES
Single press to return
80mAh
70 minutes(Test by Celink)
About 5 days (Test by Celink)
About 45 days(Test by Celink)
YES
About 3 Hours
Magnetic charging
Double color TPU
113mm+80mm(Bracelet body not-including)
IP67
Display
Device
Screen brand
Screen size
Resolution
Bluetooth
G sensor
Heart rate
Motor
Button
Battery
charging time
Usage time
Standby time
Independent GPS
GPS ON
Charger
Strap
Strap Length
Water-proof
Support multiple sport modes:
outdoor running, race walking
and biking.
When connected with your
smart phone, you can enjoy
the simplified access to your
music by music control function
on your Sport.
The bracelet cannot be connected to the APP.
① Return the bracelet to the factory setting.
② Restart the phone
③ Switch the Bluetooth on.
④ Please check whether the bracelet is connected by other mobile phones.
To disconnect IOS phone with Sport, in addition to unbind the Sport in
the APP, you also have to ignore the “ GPS Band 01” in the phone’s
Bluetooth setting.
Fail to answer or reject a call on the bracelet?
If the android phone is connected to the bracelet, Check if the authorization
related calls for Sports APP in the software authorization management
of the phone has been enabled or not.
related calls for Sports APP in the software authorization management
of the phone has been enabled or not.
If the iPhone is connected to the bracelet, check that the following settings
are normal:
① Enable the notification function of the APP. If not,A message bar will
POP up at the top of first Page, click the prompt, and then follow the
guidance to enable notification. The SMS notification function of APP
should be switched on.
② Setting-Notification-Type of notification-Both switches of “Notification
Allowed” and “Display in Notification Centre”should be switched on.
(If the phone system is IOS 9,SMS notification Settings cannot be checked
for “no recent project”)
are normal:
① Enable the notification function of the APP. If not,A message bar will
POP up at the top of first Page, click the prompt, and then follow the
guidance to enable notification. The SMS notification function of APP
should be switched on.
② Setting-Notification-Type of notification-Both switches of “Notification
Allowed” and “Display in Notification Centre”should be switched on.
(If the phone system is IOS 9,SMS notification Settings cannot be checked
for “no recent project”)
Attention:If the phone system is IOS7 , you will fail to answer or reject
a call via bracelet because of low system version.
a call via bracelet because of low system version.
The bracelet cannot control the phone’s music play.
If the bracelet is connected to android phone,check whether the following
three settings are normal:
① The Bluetooth of cell phone and bracelet need to be both enabled; and
the APP and bracelet is in the connected state.
② Specify the default music player in the Apps Bracelet Settings-music control.
③ Due to compatibility issues of some music players, problems may happen
that the bracelet could not display the song names or unable to control
music play. ( Such as QQ music)
If the iPhone is connected to the bracelet, check whether the following
two settings are normal:
① The Bluetooth of your phone and your watch need to be enabled; and
the watch is connected to the APP.
② The Bluetooth “GPS Band 01” of bracelet needs to be connected manually,
when it connects with the Bluetooth of the phone for the first time, when you
enter the “Music” interface of bracelet and shows “connecting” , the Bluetooth
of the phone can only search the “GPS Band 01”Bluetooth successfully.
of the phone can only search the “GPS Band 01”Bluetooth successfully.
10
Celink Sport
Pair Celink Sport
FAQs
1.Please log in to “Google Play”, or “APP Store”,
search “Celink Sport” for download.
Quick Start Guide
Touch Operation
Touch Operation
Scroll up and down to
switch watch faces.
switch watch faces.
Click the side button one time to
return to the main interface.
return to the main interface.
—Enable the phone’s Bluetooth, turn on the bracelet.
—Flip to [More]-[About] Interface of the bracelet, you
will read the Bracelet ID.
—Flip to [More]-[About] Interface of the bracelet, you
will read the Bracelet ID.
—Launch APP, find and select the matching Bracelet model.
—It will start to search, and bracelet ID will show up in
the list for connection.
—Confirm the connection on the Bracelet Screen.
—It will start to search, and bracelet ID will show up in
the list for connection.
—Confirm the connection on the Bracelet Screen.
Bracelet Activation
① Put the bracelet on the specified charger
② Plug-in the USB connector for the charger into any power source with USB
port, it takes 60-70 minutes to fully charge the battery.
③ It will vibrate to notify you when charging starts, charging
interrupted or charging finished.
④ It will remind you to charge by vibration when battery is low.
② Plug-in the USB connector for the charger into any power source with USB
port, it takes 60-70 minutes to fully charge the battery.
③ It will vibrate to notify you when charging starts, charging
interrupted or charging finished.
④ It will remind you to charge by vibration when battery is low.
Charging
Wear the bracelet one finger’ width left to the Carpal bone, keep one finger
space between the bracelet and the wrist for appropriate tightness, to
guarantee the accurate reading of heat rate.
space between the bracelet and the wrist for appropriate tightness, to
guarantee the accurate reading of heat rate.
2~3cm
How to wear the bracelet
Charging Activation:Please charge Sport with 5V output
Charger to activate the bracelet.Turn on Bluetooth of the
phone, and launch the App, Log in to your personal account
with Email, We-chat, or QQ account.
Charger to activate the bracelet.Turn on Bluetooth of the
phone, and launch the App, Log in to your personal account
with Email, We-chat, or QQ account.
After login, choose the matching bracelet model.
Heart rate become visible now,
improve awareness to your
health and fitness condition.
GPS Sport Band
User Manual
“Burn after reading”style
notification management, more
respectful to your privacy.
Welcome to use Celink Sport
Please read all instructions carefully
before using your Celink Sport.
2.Scan the following QR code to download the APP directly.
*Applicable for both IOS and Android.
07
①
②
③
④
⑤
Start GPS
Starting race walking, outdoor running, or biking on the Sport
will automatically activate the GPS.
will automatically activate the GPS.
① Choose a sport mode;
②The GPS will start automatically and require a certain time for loading,
please wait patiently for 1-2 minutes.
③ After the GPS starts successfully, enter the countdown state.
④ At the end of countdown, starts to record the exercise data.
⑤ Press right side button, enter the pause interface, you can select finish t
he exercise too.
* After the exercise, Sport will send the data to APP, which will generate routes
map based on GPS information(as per right picture)
Remarks:GPS position is affected by the weather and surrounding buildings.
If the positioning is unsuccessful, please re-enter sport mode and try again.
②The GPS will start automatically and require a certain time for loading,
please wait patiently for 1-2 minutes.
③ After the GPS starts successfully, enter the countdown state.
④ At the end of countdown, starts to record the exercise data.
⑤ Press right side button, enter the pause interface, you can select finish t
he exercise too.
* After the exercise, Sport will send the data to APP, which will generate routes
map based on GPS information(as per right picture)
Remarks:GPS position is affected by the weather and surrounding buildings.
If the positioning is unsuccessful, please re-enter sport mode and try again.
Sport will record your exercise
achievements faithfully and
sort them out to present clearly.
When there is incoming
calls, Sport will alert you
by light vibration.
138
0755
0755
Time
40”25
Distance
23.62
Steps
Steps
2563
Steps
Heart rate
Music control
Alarm Alert
Calories
Distance
Share
Goals setting
Time
Weather
Notification
Camera control
Restore settings
Find phone
Watch faces
Multi-sport Mode
Non-disturbance
Workout
Heart rate
Music
Notification
Screen
Control Mode
F
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.