GoNet Systems Ltd 56-100F-000 Benutzerhandbuch
GoBeam 5100/6100
Installation Guide
11
Hardware and Connectors Installation Tools
The following tools are required to mount the GoBeam
5100/6100.
5100/6100.
Table 5.
Mounting Tools and Equipment
Description
Picture
Combination Wrench (7 mm)
7 mm
Combination Wrench (13 mm)
13 mm
Torque Wrench
All hardware and tools used for assembling and mounting the
GoBeam 5100/6100 are Metric.
GoBeam 5100/6100 are Metric.
Mounting Adapters
When mounting to a pole, the required mounting adapter is based
on the position of the pole. Installation to a horizontal pole
requires using the ‘L’ adapter. Installation to a vertical pole
requires using the ‘T’ adapter.
on the position of the pole. Installation to a horizontal pole
requires using the ‘L’ adapter. Installation to a vertical pole
requires using the ‘T’ adapter.
To assemble the ‘L’ adaptor [C] to the GoBeam 5100/6100
unit:
unit:
•
Attach the ‘L’ adapter to the GoBeam 5100/6100 using an
M8x25 hex bolt [G], a spring washer [I], and a flat washer
[H], as illustrated in Figure 3.
M8x25 hex bolt [G], a spring washer [I], and a flat washer
[H], as illustrated in Figure 3.
Figure 3. Mount ‘L’ Assembly
Flat Washer
Spring Washer
Hex Bolt
“L” Adapter