Orion Electric Co Ltd M4F0A Benutzerhandbuch

Seite von 50
33
PO
WER
EJECT
TV/VCR
COUNTER RESET
INPUT SELECT
REC/O
TR
SPEED
MENU
+
+
SET
SKIP
SEARCH
+
TRA
CKING
AU
TO
CANCEL
ENTER
ST
OP
PLA
Y
F.FWD
REW
TIMER REC
PA
USE/STILL
CHANNEL
CALL
1
2
3
4
5
6
7
8
0
9
Best results during speed search playback can be obtained with cassette tapes recorded in the "SP" or "SLP" mode.
A few noise bars will appear on the picture during SPEED SEARCH and STILL.
The audio output is muted during SPEED SEARCH and STILL.
To prevent damage to the tape, CUE, REVIEW and STILL playback is automatically changed to the
PLAYBACK mode after 5 minutes.
To visually search backward, press the REW button
once or twice in the PLAYBACK mode.
To visually search forward, press the F.FWD button
once or twice in the PLAYBACK mode.
Press the PLAY button to resume normal viewing speed.
Press the PLAY button to resume normal viewing speed.
NOTES:
REW
F.FWD
TO VISUALLY SEARCH FOR DESIRED POINTS
When either the F.FWD or REW button is pressed in the PLAYBACK mode, the speed search picture will appear.
When pressed twice, the search picture will increase speed. Speed search time depends upon the speed used
(SP, LP or SLP) during recording. To rewind or fast forward a tape, press the STOP button, and then press the REW
or F.FWD button.
SPECIAL PLAYBACK
Press the SKIP SEARCH button in the PLAY mode. The
VCR will search forward through approximately 30 seconds
of the tape (e.g. unwanted commercial time) for each press of
the SKIP SEARCH button (maximum six presses) and then
resume normal playback.
Press the PAUSE/STILL button in the
PLAYBACK mode.
Press the PAUSE/STILL button again to
resume normal playback.
SKIP SEARCH
TO WATCH A STILL PICTURE
1 press:
30 seconds of tape
2 presses: 60 seconds of tape
3 presses: 90 seconds of tape
For example:
SKIP
SEARCH
PAUSE/STILL
 4C73101A(P28-34)
17/9/99, 4:17 PM
33