Concealite Life Safety Products SS2000 Benutzerhandbuch
Step 1: Sensor Mounting
A. Determine mounting location within room or
area to be covered. Center the sensor within
the center of the room/area when possible.
Loosen front knobs.
area to be covered. Center the sensor within
the center of the room/area when possible.
Loosen front knobs.
B. Slide to adjust the four (4) room control panels
to the distance indicated to match the distance in
feet between the sensor and each of the room
wall (to allow activation from any movement within
that room area).
to the distance indicated to match the distance in
feet between the sensor and each of the room
wall (to allow activation from any movement within
that room area).
Loosen Front Knobs to Slide Panels
Slide All Four Panels to the Match the Distance
in Feet Between Sensor and Room Walls
Instructions
SpaceStation
i
2
TM
Phone: 605.542.4444
INSTALLATION | Sensor Mounting
WARNING: to avoid fire, shock/electrocution, or injury – TURN OFF POWER at circuit breaker or fuse and test to
ensure that power is off before wiring. Remove and discard the packaging materials. Failure to follow published
installation instructions or any modifications to the product may damage the unit and will void the warranty.
ensure that power is off before wiring. Remove and discard the packaging materials. Failure to follow published
installation instructions or any modifications to the product may damage the unit and will void the warranty.
Adjustable Range Control Panels (RCP)
controls exact cut off range of each room
controls exact cut off range of each room
ROOM WIDTH
ROOM LENGTH
Room Area Range Coverage
at Sensitivity % Setting
Ceiling
Height
8 Feet
10%
35%
50%
75% 100%
10 Feet
12 Feet
7'
x
7'
8'
x
8'
9'
x
9'
12'
x
12'
20'
x
20'
10'
x
10'
13'
x
13'
17'
x
17'
22'
x
22'
9'
x
9'
12'
x
12'
20'
x
20'
25'
x
25'
9'
x
9'
8'
x
8'
Area Sensitivity Adjustment (SpaceStation Centered in Room)
Note: Maximum 60' Height Provides Maximum Range Coverage to 50 x 50 Feet
v.092611–SS