EnGenius Technologies ENH1350EXT Benutzerhandbuch

27

To attach the ENH1350EXT to a wall using wall 
mounting kit.

A.  Determine where the Access Point to be placed and 

stick the Adhesive label on the surface.

B.  Use the appropriate drill bit to  drill two 8.1mm 

diagram and 26mm depth holes on the markings of the 
label.C.  Remove the label and screw the anchors unto 
the holes until they are flush with the wall.

D. Screw the included screws into the anchors. Place the 

Access Point against wall with the mounting screw heads.

To attach the ENH1350EXT to a pole using the 
provided pole mounting kit:

A.  Thread the open end of the Pole Strap through the two 

tabs on the Pole Mount Bracket.

B.Lock and tighten Pole Strap to secure Pole Mount Bracket 

to the pole.