EnGenius Technologies ENS620EXT Benutzerhandbuch

16

1.  Remove the rear bottom panel.

2.  Connect one end of the Ethernet cable into the LAN(PoE) 

port of the AP/Bridge and the other end to the PE port 
on the PoE Adapter.

3.  Connect the Power cord with the PoE Adapter and plug 

the other end into an electrical outlet.

4.  Connect the second Ethernet cable into the LAN port of 

the PoE adapter and the other end to the Ethernet port 
on the computer.

5. Place the pane removed from step A back into the 

device.

6.  Screw on the provided antennas to the top of this device.

This diagram depicts the hardware configuration.

Note:  The Access Point NOLY supports the included 
proprietary 24V PoE adapter. 

Hardware Installation

1

2.4GHz

2.4GHz

5GHz

5GHz

1

2

2

3

3

4

5

6