EnGenius Technologies ESR1750 Benutzerhandbuch
86
IPv6
There are several connection types to choose from: Auto Detection, Static IPv6, Autoconfiguration (SLAAC/DHCPv6), PPPoE, IPv6
in IPv4 Tunnel, 6to4, and Link-local. If you are unsure of your connection method, please contact your IPv6 Internet Service Provider.
in IPv4 Tunnel, 6to4, and Link-local. If you are unsure of your connection method, please contact your IPv6 Internet Service Provider.
Enabling IPv6 Settings
To view the Basic settings, click IPv6 then select Basic.
Before using or configuring the IPv6 protocol, or IPv6 passthrough, on an ESR Series Router you must enable it.
Before using or configuring the IPv6 protocol, or IPv6 passthrough, on an ESR Series Router you must enable it.
IPv6
Select enable to configure the IPv6 protocol on the router.
Select enable to configure the IPv6 protocol on the router.
IPv6 Passthrough
Select enable to allow IPv6 passthrough functionality.
IPv6 must be disabled to enable this feature.
Select enable to allow IPv6 passthrough functionality.
IPv6 must be disabled to enable this feature.
Click Apply to save the settings or Cancel to discard changes.
Note: If you are using the PPPoE option, you will need to ensure that any PPPoE client software on your computers has been removed or
disabled.
disabled.