EnGenius Technologies ESR600 Benutzerhandbuch
A
PPENDIX
C
L
INK
L
AYERS
C-2
4. MTU: Maximum Transmission Unit. It specifies the largest packet size permitted for internet transmission. The factory default
MTU size of Static IP is 1500. If you wish to manually change the MTU size, set it between 512 and 1500.
5. Point-to-Point Tunneling Protocol (PPTP)
To set up a PPTP connection, enter the type of WAN connection (Static IP or DHCP). After, depending on the type of WAN, follow
the instructions of DHCP or Static IP to fill out the corresponding information. Then, proceed to enter the Username, Password, Ser-
vice, and Connection ID of the PPTP internet connection. Once completed, click Next. Once configured, the internet connection will
successfully connect.
the instructions of DHCP or Static IP to fill out the corresponding information. Then, proceed to enter the Username, Password, Ser-
vice, and Connection ID of the PPTP internet connection. Once completed, click Next. Once configured, the internet connection will
successfully connect.
Layer 2 Tunneling Protocol (L2TP)
To set up an L2TP connection, enter the type of WAN connection (Static IP or DHCP). After, depending on the type of WAN, follow
the instructions of DHCP or Static IP to fill out the corresponding information. Then, proceed to enter the Username, Password, and
Service. Click next when completed. Once configured, the internet connection will successfully connect.
the instructions of DHCP or Static IP to fill out the corresponding information. Then, proceed to enter the Username, Password, and
Service. Click next when completed. Once configured, the internet connection will successfully connect.
MTU: Maximum Transmission Unit. It specifies the largest packet size permitted for internet transmission. The factory default MTU
size of Static IP is 1500. If you wish to manually change the MTU size, set it between 512 and 1500.
size of Static IP is 1500. If you wish to manually change the MTU size, set it between 512 and 1500.