NEC Corporation of America EWC2267 Benutzerhandbuch

25

Enlarge your image and send it to the other party 
during a videophone call.

z The zoom can be adjusted between 2 steps, 1× 

and approximately 2×. If you end the videophone 
call, the zoom ratio returns to 1× (standard).

z The substitute image being sent cannot be 

enlarged.

1

X

Use v 

Decorate your videophone call screen (your camera 
image) with a stamp and frame.

1

X

X

X

……Select a frame from the Frame 

selection screen.

……Select a stamp from the Stamp 

selection screen and decide the paste position.

■ To erase a frame or stamp
Select “Off decoration” from the function menu of 
the videophone in-call screen.

1

X

X

X

The message is displayed. The message 
disappears automatically in approximately 15 
seconds.

■ To cancel entering a message in text entry

X

Erase the message

X

t 

■ To erase the message manually after it is 

X

t (1 second or longer)

You can also erase a message by selecting “Off 
decoration” from the function menu.

z

When a videophone call is switched and redialed 
as a voice call, not digital communications 
charges but voice call charges apply.

z

When a call is redialed, only the voice call is 
logged in “Redial”/“Dialed calls”.

z

Even if “Auto redial as voice” is set to “ON”, dialing 
may not be possible depending on the network or 
other party, e.g. the line is busy.

z

Even when “Hands-free switch” is set to “ON”, 
handsfree does not activate automatically in the 
following cases:

• While Manner mode is set
• When an earphone/microphone (optional) is 

connected (the microphone operation is in 
accordance with “Headset mic. setting”)

• When holding a call or Record message is 

activated for an incoming call

z

Even when “V.phone priority” is set, you cannot 
answer a videophone call if you are using multi 
access such as i-mode communication during a 
voice call.

z

When set to “Packet downld priority”, “V.phone 
answerphone” or “Call forwarding”, received 
videophone calls are recorded as “Missed calls” in 
“Received calls”.

z

Even when set to “V.phone priority” or “Packet 
downld priority”, the “Voice Mail” or “Call 
Forwarding” service is activated if the ring time for 
the “Voice Mail” or “Call Forwarding” service is set 
to 0 second.

N

N

z

If “Front camera Reverse” is set to “OFF” for your 
camera image, the decoration is displayed 
normally, and a stamp with text can be read 
correctly.

N

z

If “Front camera Reverse” is set to “OFF” for your 
camera image, the decoration is displayed 
normally, and text can be read correctly.

LUK_Tel.fm  25 ページ  ２００９年７月１３日　月曜日　午前１０時２７分