Manualsbrain.com
  1. Handbücher
  2. Marken
  3. NEC Corporation of America
  4. IQF1504
  5. Benutzerhandbuch

NEC Corporation of America IQF1504 Benutzerhandbuch

Download
Seite von 5
Quick Start Guide
’ 11.12
2
3
4
5
6
1
9
10
11
12
13
7
8
Thank you for your purchasing of this 
product. Before using the this product, 
read this manual.
For more information about this product, 
please refer to the User's Manual which is 
shown on your PC.
http://www.XXXXXXXXXXXXXXX
Supplied Accessories
Getting Started
Parts Names and Functions
1
Power switch
2
microUSB connector
3
Proximity/Illuminance sensor
4
Notification LED
5
Earpiece (receiver)
6
Display (Touch panel)
7
Mouthpiece/microphone
8
 (menu) key
9
 (home) key
10
 (back) key
11
 (search) key
12 Speaker
13 Camera
14 Light
15 +/- (volume) keys
16 Sub microphone
17 microSD card slot
18 Back cover
19 SIM slot
20 Strap slot
Removing/Attaching the Back Cover
To remove the back cover, hook your finger on the slot and 
remove in direction without too much force.
To attach the back cover, insert the tabs on top of the back 
cover into the slots, slide it in direction and push it down 
securely in direction.
Securely push the areas illustrated by the dots and make sure 
that there is no space between the back cover and this 
product.
Inserting the SIM Card
SIM is an IC card that stores your phone number and other 
information. Some functions are not available if the SIM card is 
not inserted.
1
Hold the tab to slide the tray.
2
Place the SIM card on the tray, setting the IC surface 
on the upside.
3
Slide the tray to the end.
Inserting the microSD Card
Insert the microSD card into the microSD slot until it is 
locked.
For removing the microSD card, push it.
Attaching the Battery
Insert in the direction by hooking the tabs on the battery 
pack in the slots.
• This Product
• Quick Start Guide (this 
manual)
• AC Charger
• Battery Pack
• microSD* (sample)
* This has been attached when purchased.
• microUSB Cable (sample)
• microUSB to 3.5 mm Headset Cable (sample)
• Battery Cradle (sample)
Quick 
Start 
Guide
1
2
3
4 5
6
7
8
9 10 11
13
12
14 15
16
17
18
19
20
Charging with the AC Charger
1
Open the microUSB connector cap.
2
Connect the microUSB plug of the supplied microUSB 
cable with engraved side facing down with the 
microUSB connector.
3
Connect the USB plug of the cable with the supplied 
AC charger.
4
Insert the AC charger plug into the power outlet.
Charging with the PC Connection
1
Open the microUSB connector cap.
2
Connect the microUSB plug of the supplied microUSB 
cable with engraved side facing down with the 
microUSB connector.
3
Connect the USB plug of the cable with your PC.
■ About the notification LED
Notification LED turns red while charging.
Notification LED turns green when the battery level is over 
90%, and off when charging is complete.
When charging starts, such as when the battery is depleted, 
the notification LED may not immediately light. However, 
charging has started.
Using the battery cradle
You can also charge the battery pack using the battery cradle. 
1
After removing the battery pack, set it into the battery 
cradle.
2
Connect the microUSB jack of the microUSB cable 
with the battery cradle.
3
Connect the USB jack of the microUSB cable with the 
AC charger.
4
Connect the AC charger plug with the power outlet.
Charging starts and the Charge LED lights on red.
When finishing the charging, the Charge LED lights on 
green.
Turning Power On and Off
Turning Power On
Press and hold the power switch for two seconds or 
longer.
Turning Power Off
1
Press and hold the power switch for one second or 
longer.
2
Touch "Power off".
3
Touch "OK".
■ Sleep mode
When the power switch is pressed, the display turns off and 
this product enters sleep mode.
Pressing the power switch quits sleep mode.
■ Screen lock
When you turn the power on or quit sleep mode, the touch 
panel is locked. Drag 
 to 
 to unlock the screen.
Initial Settings
When the power is first turned on, the initial setting screen 
appears.
1
Tap "Change language" if you need.
2
Tap a language to set.
3
Tap the Android icon.
4
Tap "Skip" for undo the Wi-Fi setting.
For setting Wi-Fi, tap "Connect to Wi-Fi", and select the 
Wi-Fi network. Then tap "Connect" to complete the Wi-Fi 
setting.
5
Check the displayed content, and tap "Next".
6
Set each setting.
7
Tap "Next".
8
Tap "Home" or "Launcher" to complete initial settings.
Basic Operation
Using 
the     
Keys
•
 displays the menu available for the current screen. 
•
 displays the Home screen.
•
 goes back to the previous screen.
•
 opens "Google Search" when pressing on the Home 
screen.
Using the Touch Panel
■ Tap
With touching and releasing your finger, the item is selected or 
run.
■ Touch and hold
In some screens, continuing to touch the touch panel displays 
a menu.
■ Slide
With sliding your finger, the screen scrolls up/down/left/right in 
direction.
■ Drag
Quickly slide your finger while touching an item (icon, etc.) to 
move.
■ Flick
With quickly sliding and releasing your finger, the screen 
quickly scrolls in direction.
■ Pinch with two fingers
For zoom in or zoom out, touch the touch panel with two 
fingers, and then slide them apart or together.
Text Entry
Tap a text box on the screen to display the on screen 
keyboard.
■ QWERTY keyboard
This keyboard uses a PC keyboard layout.
 
■ 10-key keyboard
This is an ordinary keyboard of mobile phones.
Home Screen
1
Widgets
2
Application shortcuts
3
Dock
4
Launch "Phone", "Call log", and "Contacts".
5
Open the applications list screen
6
Launch browser
Reading the Status Bar
Notification icons for new information are displayed on the left, 
and status icons are displayed on the right side of the status 
bar.
 
1
2
3
4
1
2
3
1
2
3
4
1
2
3
4
5
6