NEC Corporation of America KMP7N2E1 Benutzerhandbuch

39

N600i provides you with the functions of Bluetooth,
Synchronisation and Flash memory as an
external connection.

Using this function allows you to connect an external
Bluetooth supported device to N600i. The following
services are available:

• Dial-up connection 

Connecting N600i to a PC via Bluetooth technology
enables the PC to use N600i just like a modem to
establish a dial-up connection to an Internet service
provider.

• Data transfer (Only one phonebook data is available.)

You can transfer the phonebook data to another
Bluetooth device such as PC, PDA and N600i.

• Headset/handsfree connection

You can make/receive a call using a Bluetooth headset
or handsfree kit

2

Data transfer is performed as follows:

• For sending data from N600i

1. Select the phonebook data to be sent on your N600i.
2. Search the available device and select the target.
3. Bluetooth connection is established
4. Data transfer starts.

• For receiving a phonebook data on N600i

1. Select Discoverable  (see the next section) to set
your N600i to standby mode
2. Data is sent from the target device.

3. The save confirmation screen appears. 
4. Press YES (SK1 key) to save the transferred data
into phonebook.

☛

 7, or select 7 (External connection) to press 

the Enter key on the Menu screen, and Bluetooth to 
open or close connection for the Bluetooth devices.

☛

Press Options and the following menus are available. 

1

Discoverable Sets standby mode for connection

from an external device.

2

Connects or disconnects to/from NEC
headset. This menu appears after
registration.

3

Connects or disconnects to/from a
PC. 
This menu appears after registration.

4

Connects or disconnects to/from a
handsfree kit. This menu appears
after registration.

1

Information Displays information on the selected

device. 

2

Searches for nearby Bluetooth devices
to register.

3

Changes the handset status to bonding
wait status in which the handset waits
for the authentication from other
devices in order to register the devices.

4

Displays the Bluetooth information of
the handset. The device name can be
edited, in which case, the edited device
name is displayed at the other party's
Bluetooth device. 

5

Deletes the registered devices from the
list.

6

Disconnects all Bluetooth connections.

☛

 7, or select 

7 (External 
connection) to 
press the Enter 
key on the Menu 
screen.