Motorola Solutions Inc. 99FT5029 Benutzerhandbuch

This section describes the procedures to unpack and mechanically install the MOTOTRBO 
Repeater. A variety of mounting methods are possible depending on which type of cabinet or rack 

 

(if any) has been selected to house the repeater(s). 

The following items are packed together in the box:

• MOTOTRBO Repeater
• AC Line Cord
• MOTOTRBO Repeater Installation Guide
• Product Safety and RF Exposure Booklet

The repeater is shipped in a box. Upon delivery, the equipment must be removed from the container 
and transferred to a rack or cabinet.

NOTE: Customer-supplied cabinets and racks must have mounting rail and hole spacing compatible 

with EIA Universal 48.3 cm (19 inches) specifications. Cabinets must provide adequate 
ventilation (

) and 

must meet the following minimum criteria:

- 41.3 cm (16.25 inches) deep
- 48.3 cm (19 inches) wide
- 13.4 cm (5.25 inches) high
- Two mounting rails 5 cm (2 inches) from the front of the cabinet with front mounting holes 

5.7 cm (2.25 inches) apart (center to center).

Contact Motorola Technical Support for specific question(s) regarding mounting equipment in 
customer-supplied cabinets.

Be sure to observe proper electrostatic discharge precautions if modules must 
be removed from the repeater.