Arris VMS4100 Benutzerhandbuch
1
IMPORTANT SAFETY INSTRUCTIONS
•
Read these instructions.
•
Keep these instructions.
•
Heed all warnings.
•
Follow all instructions.
•
Do not use this apparatus near water.
•
Clean only with dry cloth.
•
Do not block any ventilation openings. Install in accordance with the
manufacturer’s instructions.
manufacturer’s instructions.
•
Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including amplifiers) that produce heat.
stoves, or other apparatus (including amplifiers) that produce heat.
•
Do not defeat the safety purpose of the polarized or grounding-type plug. A
polarized plug has two blades with one wider than the other. A grounding
type plug has two blades and a third grounding prong. The wide blade or
the third prong is provided for your safety. If the provided plug does not fit
into your outlet, consult an electrician for replacement of the obsolete
outlet.
polarized plug has two blades with one wider than the other. A grounding
type plug has two blades and a third grounding prong. The wide blade or
the third prong is provided for your safety. If the provided plug does not fit
into your outlet, consult an electrician for replacement of the obsolete
outlet.
•
Protect the power cord from being walked on or pinched particularly at
plugs, convenience receptacles, and the point where they exit from the
apparatus.
plugs, convenience receptacles, and the point where they exit from the
apparatus.
•
Only use attachments/accessories specified by the manufacturer.
•
Unplug this apparatus during lightning storms or when unused for long
periods of time.
periods of time.
•
Refer all servicing to qualified service personnel. Servicing is required when
the apparatus has been damaged in any way, such as the power supply cord
or plug is damaged, liquid has been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.
IMPORTANT SAFETY CONSIDERATIONS FOR ALL SET-TOPS
the apparatus has been damaged in any way, such as the power supply cord
or plug is damaged, liquid has been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.
IMPORTANT SAFETY CONSIDERATIONS FOR ALL SET-TOPS
•
The mains plug is the main disconnect device. It shall remain readily
accessible and operable.
accessible and operable.
•
The apparatus shall not be exposed to dripping or splashing and no objects
filled with liquids, such as vases, shall be placed on the apparatus.
filled with liquids, such as vases, shall be placed on the apparatus.
•
WARNING: To reduce the risk of fire or electric shock, do not expose this
apparatus to rain or moisture.
apparatus to rain or moisture.
•
WARNING: Batteries shall not be exposed to excessive heat such as
sunshine, fire or the like.
sunshine, fire or the like.
•
See label on bottom of unit for additional markings.
During Transportation to the Subscriber Home
During Transportation to the Subscriber Home
•
Transport the cable terminal in its shipping box or an equally padded
container.
container.
•
Do not expose the terminal to rain or moisture.
During Installation
During Installation
•
Do not place the terminal in an enclosed area where the cooling vents are
blocked or impede the flow of air through the ventilation openings.
blocked or impede the flow of air through the ventilation openings.
•
Install the terminal so that its position does not interfere with its proper
ventilation. For example, do not place the terminal on a bed, sofa, rug, or
similar surface that could block the ventilation openings.
ventilation. For example, do not place the terminal on a bed, sofa, rug, or
similar surface that could block the ventilation openings.
•
Install the terminal so that there is a minimum of two inches of space
between surrounding surfaces and the top, left, and right sides of the
terminal to ensure proper ventilation.
between surrounding surfaces and the top, left, and right sides of the
terminal to ensure proper ventilation.
•
Install the terminal away from heat sources such as radiators, heat registers
and stoves. Installation of the terminal near consumer electronics devices,
such as stereo receiver/amplifiers and televisions, is permitted as long as
the air surrounding the terminal does not exceed 40º C (104º F).
and stoves. Installation of the terminal near consumer electronics devices,
such as stereo receiver/amplifiers and televisions, is permitted as long as
the air surrounding the terminal does not exceed 40º C (104º F).
•
Place the terminal on a flat surface not prone to vibration or impact.
•
Do not place the terminal on top of another electronic device.
•
Do not install the terminal in an area where condensation occurs.
•
To prevent the temporary loss of guide data and cause a temporarily non-
responding terminal, do not plug the AC power cord into a switched power
outlet.
ADDITIONAL SAFETY CONSIDERATIONS FOR DVR MODELS
responding terminal, do not plug the AC power cord into a switched power
outlet.
ADDITIONAL SAFETY CONSIDERATIONS FOR DVR MODELS
•
To avoid shock and vibration damage to the internal hard drive, do not
move the terminal while it is plugged in.
move the terminal while it is plugged in.
•
To allow the hard drive to spin down and park its heads, wait at least 10
seconds after disconnecting power before moving the terminal.
seconds after disconnecting power before moving the terminal.
•
Install the terminal so that there is a minimum of 3 inches of space between
surrounding surfaces and the back of the terminal to ensure proper
ventilation.
surrounding surfaces and the back of the terminal to ensure proper
ventilation.
FCC Certification
This product contains a radio transmitter and accordingly has been certified
as compliant with 47 CFR Part 15 of the FCC Rules for intentional radiators.
Products that contain a radio transmitter are labeled with FCC ID and the FCC
logo.
CAUTION: Exposure to Radio Frequency Radiation. To comply with the FCC
RF exposure compliance requirements, the separation distance between the
antenna and any person’s body (including hands, wrists, feet and ankles)
must be at least 20 cm (8 inches).
FCC Compliance
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Warning (Part 15.21)
Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
FCC DECLARATION OF CONFORMITY
ARRIS International, PLC., 3871 Lakefield Drive, Suwanee, GA 30024,
1-866-36-ARRIS, declares that this Class B digital device complies with 47
CFR Parts 2 and 15 of the FCC rules.
SPECIAL SYMBOLS THAT MIGHT APPEAR ON THE EQUIPMENT
This product contains a radio transmitter and accordingly has been certified
as compliant with 47 CFR Part 15 of the FCC Rules for intentional radiators.
Products that contain a radio transmitter are labeled with FCC ID and the FCC
logo.
CAUTION: Exposure to Radio Frequency Radiation. To comply with the FCC
RF exposure compliance requirements, the separation distance between the
antenna and any person’s body (including hands, wrists, feet and ankles)
must be at least 20 cm (8 inches).
FCC Compliance
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Warning (Part 15.21)
Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
FCC DECLARATION OF CONFORMITY
ARRIS International, PLC., 3871 Lakefield Drive, Suwanee, GA 30024,
1-866-36-ARRIS, declares that this Class B digital device complies with 47
CFR Parts 2 and 15 of the FCC rules.
SPECIAL SYMBOLS THAT MIGHT APPEAR ON THE EQUIPMENT
The exclamation point, within an equilateral triangle, is intended to
alert the user to the presence of important installation, servicing,
and operating instructions in the documents accompanying the
equipment.
and operating instructions in the documents accompanying the
equipment.
This symbol indicates that dangerous voltage levels are present
within the equipment. These voltages are not insulated and may be
of sufficient strength to cause serious bodily injury when touched.
The symbol may also appear on schematics.
of sufficient strength to cause serious bodily injury when touched.
The symbol may also appear on schematics.
CARING FOR THE ENVIRONMENT BY RECYCLING
When you see this symbol on an ARRIS product, do not dispose of
the product with residential or commercial waste.
Recycling your ARRIS Equipment
Please do not dispose of this product with your residential or
commercial waste. Some countries or regions, such as the European
Union, have set up systems to collect and recycle electrical and
electronic waste items. Contact your local authorities for
information about practices established for your region. If collection
systems are not available, call ARRIS Customer Service for
assistance.
the product with residential or commercial waste.
Recycling your ARRIS Equipment
Please do not dispose of this product with your residential or
commercial waste. Some countries or regions, such as the European
Union, have set up systems to collect and recycle electrical and
electronic waste items. Contact your local authorities for
information about practices established for your region. If collection
systems are not available, call ARRIS Customer Service for
assistance.
SOFTWARE LICENSE, SAFETY, AND REGULATORY INFORMATION
ARRIS Enterprises, Inc., 3871 Lakefield Drive, Suwanee, GA 30024
IMPORTANT: PLEASE READ THIS SOFTWARE LICENSE (“LICENSE”) CAREFULLY
BEFORE YOU USE ANY SOFTWARE, FIRMWARE AND RELATED
DOCUMENTATION (“SOFTWARE”) PROVIDED WITH THE ARRIS DIGITAL CABLE
RECEIVER OR HOME THEATER SYSTEM (EACH SHALL BE REFERRED TO IN THIS
LICENSE AS A “RECEIVER”). BY USING THE RECEIVER AND/OR USING ANY OF
THE SOFTWARE, YOU INDICATE YOUR ACCEPTANCE OF EACH OF THE TERMS
OF THIS LICENSE. UPON ACCEPTANCE, THIS LICENSE WILL BE A LEGALLY
BINDING AGREEMENT BETWEEN YOU AND ARRIS. THE TERMS OF THIS
LICENSE APPLY TO YOU AND TO ANY SUBSEQUENT USER OF THIS
SOFTWARE.
IF YOU DO NOT AGREE TO ALL OF THE TERMS OF THIS LICENSE (I) DO NOT
USE THE SOFTWARE AND (II) RETURN THE RECEIVER AND THE SOFTWARE
(COLLECTIVELY, “PRODUCT”), INCLUDING ALL COMPONENTS,
DOCUMENTATION AND ANY OTHER MATERIALS PROVIDED WITH THE
PRODUCT, TO YOUR POINT OF PURCHASE OR SERVICE PROVIDER, AS THE
CASE MAY BE, FOR A FULL REFUND.
The Software includes associated media, any printed materials, and any
“on-line” or electronic documentation. Software provided by third parties
may be subject to separate end-user license agreements from the
manufacturers of such Software. The Software is never sold. ARRIS licenses
the Software to the original customer and to any subsequent licensee for
personal use only on the terms of this License. ARRIS and its third party
licensors retain the ownership of the Software.
You may:
USE the Software only in connection with the operation of the Product.
TRANSFER the Software (including all component parts and printed
materials) permanently to another person, but only if the person agrees to