ICOM 325000 Benutzerhandbuch

5

2

N Battery installation

Before installing, or replacing the batteries, hold down [ ]
for 1 second to turn the power OFF.

q  Remove the battery cover from the receiver.

Latch

w  Install 2 R6 (AA) size Ni-MH batteries.

• Be sure to observe the correct polarity.

N Caution

•

R DANGER! NEVER short the battery terminals (or charg-
ing terminals). Also, current may flow into nearby metal 
objects such as a necklace, so be careful when placing 
batteries (or the receiver) in handbags, etc.
Simply carrying with or placing near metal objects such as 
a necklace, etc. may cause shorting. This may damage not 
only the batteries, but also the receiver.

•

R DANGER! NEVER incinerate used batteries. Internal 
battery gas may cause an explosion.

•

R DANGER! NEVER immerse the batteries in water. If the 
batteries become wet, be sure to wipe them dry BEFORE
installing them to the receiver.

• When installing batteries, make sure they are all the same 

brand, type and capacity. Also, do not mix new and old bat-
teries together.

• Never use batteries whose insulated covering is damaged.
• Keep battery terminals clean to avoid rust or misscontact. 

It’s a good idea to clean battery terminals once a week.

D Caution for the Ni-MH batteries

• CAUTION: Always use the batteries within the speci-

fied temperature range, –5˚C to +60˚C (+23˚F to +140˚F). 
Using the batteries out of their specified temperature range 
will reduce the battery’s performance and battery life.