ICOM 325000 Benutzerhandbuch
13
BASIC OPERATION
4
N Receiving
Make sure charged Ni-MH or brand new alkaline batteries
are installed (p. 5).
are installed (p. 5).
qHold down [ ] for 1 second to turn power ON.
wPush [S] or [T] to set a desired audio level.
• The function display shows the volume level while setting. See
the section to the right for details.
eSet the receive frequency. (p. 9)
rSet the squelch level. (p. 12)
• While holding down [SQL], rotate [DIAL].
• The first click of [DIAL] indicates the current squelch level.
• “LEVEL 1” is loose squelch and “LEVEL 9” is tight squelch.
• “AUTO” indicates automatic level adjustment with a noise pulse
• The first click of [DIAL] indicates the current squelch level.
• “LEVEL 1” is loose squelch and “LEVEL 9” is tight squelch.
• “AUTO” indicates automatic level adjustment with a noise pulse
count system.
• Hold down [SQL] to open the squelch manually.
t When a signal is received:
• Squelch opens and audio is heard.
• The S-meter shows the relative signal strength.
• The S-meter shows the relative signal strength.
q Power ON
[
[
]
e Set frequency
r Set squelch level
w Set audio level
e Select band
r Push for setting
the squelch
(Push to monitor)
(Push to monitor)
N Setting audio volume
The audio level can be adjusted through 40 levels.
± Push [S] or [T] to adjust the audio level.
• A beep tone sounds while adjusting. The tone sound let you
know the approximate sound level.
• Holding down either key will continuously change the audio
level.
• The display shows the volume level while setting.
AUDIO LEVEL
Minimum level
(no audio)
(no audio)
Maximum level
Initial setting
DISPLAY