ICOM 325000 Benutzerhandbuch
24
5
MEMORY CHANNELS
5
N Copying memory contents
This function transfers a memory channel’s contents to the
VFO (or another memory channel). This is useful when search-
ing for signals around a memory channel frequency and for
recalling the frequency offset, subaudible tone frequency etc.
VFO (or another memory channel). This is useful when search-
ing for signals around a memory channel frequency and for
recalling the frequency offset, subaudible tone frequency etc.
DMemoryDVFO
qSelect the memory channel to be copied.
± Push [V/M] to select the memory mode, then rotate
[DIAL] to select a desired channel.
• If desired, push [BAND] repeatedly to select a desired bank
group, then rotate [DIAL] to select a desired bank channel.
w Hold down [S.MW](V/M) for 1 second to enter the select
memory write mode.
• 1 short and 1 long beep sound.
• The “
• The “
” icon and memory channel number blink.
eRotate [DIAL] to select “VF.”
r Hold down [S.MW](V/M) for 1 second to write the selected
channel contents into the VFO.
• Automatically returns to the VFO mode.
Holding down [S.MW](V/M) for 2 seconds in step
w will
also copy the memory contents to the VFO. In that case,
steps
steps
e and r are not necessary.
DMemoryDmemory
qSelect the memory channel to be copied.
± Push [V/M] to select the memory mode, then rotate
[DIAL] to select a desired channel.
w Hold down [S.MW](V/M) for 1 second to enter the select
memory write mode.
• 1 short and 1 long beep sound.
• The “
• The “
” icon and memory channel number blink.
• Do not hold down [S.MW](V/M) for more than 2 seconds.
Otherwise the memory contents will be copied to the VFO.
eRotate [DIAL] to select the target memory channel.
r Hold down [S.MW](V/M) for 1 second again to copy.
Rotate
.
Hold down
for 1 sec.
Hold down
for 1 sec. to program.
Select the memory channel
[EXAMPLE]: Copying channel 20 to 51.