ICOM 325100 Benutzerhandbuch

2

1

PANEL DESCRIPTION

q FREQUENCY  READOUT
   Shows the operating frequency, channel name, Set 

mode contents, and so on.

 • 

 

The frequency decimal point blinks during a scan. 
(p. 30)

 • 

 

While the DTMF memory function is in use, “d” ap-
pears in the 100 MHz digit. (p. 36)

w TRANSMIT ICON

  ➥ Appears while transmitting. (p. 10)

  ➥  Blinks while transmitting with the One-Touch PTT 

function. (p. 11)

e AUDIO MUTE ICON (p. 9)
  Appears when the Audio Mute function is activated.

r NARROW MODE ICON (p. 43)
  Appears when the narrow FM mode is selected.

t OUTPUT POWER ICONS (p. 11)
  Displays the selected transmit output power level.
 • 

 

The “Mid-Low” power is not selectable in the Taiwan 
version.

y KEY ICONS
   Displays the function(s) of the front panel keys di-

rectly below the function display.

u SKIP ICON (p. 32)
   Appears when the selected memory channel is set 

as a skip channel.

i MEMORY CHANNEL NUMBER READOUT 

  ➥  Displays the selected memory channel number. 

(p. 18)

  ➥  “C” appears when the Call channel is selected. 

(p. 27)

o MEMORY ICON (p. 17)
  Appears when the Memory mode is selected.

!0 S/RF INDICATOR

  ➥  Shows the relative signal strength, while receiving 

signals. (p. 8)

  ➥  Shows the output power level, while transmitting. 

(p. 10)

!1 BUSY ICON (p. 8)

  ➥  Appears when receiving a signal, or the squelch is 

open.

  ➥ Blinks while the monitor function is turned ON.
!2 S-METER SQUELCH ICON (p. 9)
   Appears while the S-meter Squelch function is turned 

ON.

!3 SQUELCH ATTENUATOR ICON (p. 9)
   Appears while the Squelch Attenuator function is 

turned ON.

!4 PRIORITY WATCH ICON (p. 35)
  Appears during Priority Watch.

!5 AUTO POWER OFF ICON (p. 47)
   Appears when the Auto Power OFF function is turned 

ON.

!6 TONE ICONS

  ➥  The “ ” and “ ” icons appear while the subaudible 

tone encoder is in use. (p. 13)

  ➥  The “ ” and “ ” icons appear while the DTCS en-

coder is in use. (p. 13)

  ➥  The “ ” icon appears while the Tone Squelch 

(CTCSS)

 function is in use. (p. 41)

  ➥  The “ ” and “ ” icons appear while the Reverse 

Tone Squelch 

(CTCSS)

 function is in use. (p. 41)

  ➥  The “ ” icon appears while the Tone Squelch 

(DTCS) 

function is in use. (p. 41)

  ➥  The “ ” and “ ” icons appear while the Reverse 

Tone Squelch 

(DTCS)

 function is in use. (p. 41)

  ➥  The “ ” icon appears with the “ ” or “ ” icon, while 

the pocket beep function 

(CTCSS or DTCS)

 is in use. 

(p. 39)

!7 DUPLEX ICONS (p. 12)
   The “+” icon appears in the plus duplex mode, and 

the “–” icon appears in the minus duplex mode.

!8 LOCK ICON (p. 7)
  Appears while the Lock function is turned ON.

!7

!3

!4

i

!5

!6

!0

!2

!1

!8

u

o

w

y

t

e
r

q

■ Function display