ICOM 325100 Benutzerhandbuch

31

7

SCAN OPERATION

■ Scan edges programming

Scan edges can be programmed in the same manner 
as memory channels. Scan edges are programmed 
into scan edges, 1A/1b to 3A/3b, in memory channel 
sheet.

q  Set the desired edge frequency in the VFO mode:

w Push [MW] (S.MW).
 • 

The 

“

” icon and channel number blink.

e  Rotate [DIAL] to select one of scan edge channels, 

1A, 2A or 3A.

r Hold down [MW] (S.MW) for 1 second to store it.
 • 

 

3 beeps sound and the transceiver automatically 
returns to the VFO mode.

 • 

 

Scan edge 1b, 2b or 3b is automatically selected 
when continuing to hold down [MW] (S.MW)  after 
programming.

t  To program a frequency for the other pair of scan 

edges, the 1b, 2b or 3b, repeat steps 

q through r.

 • 

 

If the same frequency is programmed into a pair of 
scan edges, the programmed scan cannot start.

z Set the desired frequency in the VFO mode.

x  Push [FUNC] 

, and then [MW] 

.

c  Push [Y] or [Z] to select the scan edge channels, 

1A, 2A or 3A.

v  Push [FUNC] 

, and then hold down [MW] 

 for 

1 second to program.

 • 

 

3 beeps sound and the VFO mode is automatically 
selected.

 • 

 

The memory channel number advances to the next 
scan edge channel, 1b, 2b or 3b, when continuing 
to push [MW] 

 after programming.

b  To program a frequency for the other scan edge 

channels, repeat steps 

z to v.

Push [V/MHz].

Rotate [DIAL] to set the frequency.

Push [S.MW].

Rotate [DIAL] to select the scan edge channel.

Hold down [MW] (S.MW) for 1 second.

[i.e.]:  Programming 145.300 MHz into scan edge 1A.

Push           .

Push          then        .

Push           /          .

Push          then hold down         for 1 second.

Push                                                            .

[i.e.]:  Programming 145.800 MHz into scan edge 1b.