ICOM 325300 Benutzerhandbuch

22

4

BASIC OPERATION

N Receiving

Make sure a charged battery pack (BP-264, BP-265) or brand 
new alkaline batteries (BP-263) are installed (pp. 2, 12–14).

qPush and hold [ ] for 1 sec. to turn power ON.

w  Rotate [VOL] to set the desired audio level. (p. 16)

• The frequency display shows the volume level while setting.

eSet the receiving frequency. (p. 20)

rSet the squelch level. (p. 17)

• While continuing to push [MONI](BAND), rotate [DIAL].
• The first click of [DIAL] indicates the current squelch level.
• “LEVEL1” is loose squelch (for weak signals) and “LEVEL9” is 

tight squelch (for strong signals).

• “Auto” indicates automatic level adjustment by a noise pulse 

counting system.

• Push and hold [MONI](BAND) to open the squelch manually.

t  When a signal is received:

• Squelch opens and audio is output.
• The S/RF meter shows the relative signal strength level.

q

r Set squelch level

e Set frequency

r Push and hold for

setting the squelch
(Push and hold
 to monitor)

e Select band

w Set audio level

N Transmit power selection

The transceiver has three output power levels to suit your op-
erating requirements. Low output power during short-range 
communications may reduce the possibility of interference to 
other stations and will conserve battery power.

±  Push [H/M/L] to toggle the transmit output power between 

High (5W*), Mid (2.5 W*) and Low (0.5 W*).           *approx.

Appears

Low power transmission

Mid. power transmission

High power transmission