ICOM 382200 Benutzerhandbuch
28
8
DSC OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
D Sending a Group call
A Group call enables you to send a DSC signal to only a
speciic group.
L
You can send a Group call to a pre-entered group address, or
manually enter the address before sending. (p. 20)
1.
Push [◄] or [►] to display
.
2.
Push the software key below
.
•
The “Compose Other” screen is displayed.
L
You can also display the “Compose Other” screen by
selecting the “Compose Other” item on the Menu screen.
3.
Push [▲] or [▼] to select “Group Call,” and then push
[ENT].
[ENT].
•
The “Group Call” screen is
displayed.
displayed.
4.
Select the group to send a Group
call to, and the push [ENT].
call to, and the push [ENT].
L You can also select “Manual Input”
to manually enter the target group.
5.
Select the channel to assign, and
then push [ENT].
then push [ENT].
L The assigned channels are preset
by default.
6. Push the software key below [CALL] to send the Group
call.
•
“Transmitting Group Call” is displayed, and then the assigned
channel is automatically selected.
channel is automatically selected.
L
If Channel 70 is busy, the transceiver stands by until the
channel becomes clear.
7. Hold down [PTT] to communicate.