ICOM IC-756PRO2 Benutzerhandbuch
■
External antenna tuner connection
CONNECTING THE AH-4/AH-3
The AH-4 or AH-3 must be connected to [ANT1].
19
3
INSTALLATION AND CONNECTIONS
When 2 to 13.8 V is applied to pin 6 of [ACC(2)], the
[XVERT] jack is activated for transverter operation
and the antenna connectors do not receive or trans-
mit any signals. (p. 13)
[XVERT] jack is activated for transverter operation
and the antenna connectors do not receive or trans-
mit any signals. (p. 13)
While receiving, the [XVERT] jack can be activated as
an input terminal from an external transverter.
an input terminal from an external transverter.
While transmitting, the [XVERT] jack outputs signals
of the displayed frequency at –20 dBm (22 mV) as
signals for the external transverter.
of the displayed frequency at –20 dBm (22 mV) as
signals for the external transverter.
Transverter jack
■
Transverter jack information
Coaxial cable (from the AH-4 or AH-3)
Long wire or optional AH-2b
Ground
Transceiver
AH-4 or AH-3
ANT1
Control cable