D5W Inc BM1 Benutzerhandbuch
Instruction Manual revision 1.0
BM-1
D5W, INC. BEACON, MODEL BM-1
Use Instructions:
Start-up: Use supplied CR2032 battery. Open battery compartment door and install battery with
negative side touching the circuit board. Once a battery is installed the Beacon will begin to advertise
to other devices that can communicate using Bluetooth Low Energy.
Pairing: After the battery has been installed, pairing with your phone or tablet can be accomplished.
Perform a search from your communication device and identify the Beacon.
Once paired, you will be able to send keyboard like commands to your phone, tablet, or other
Bluetooth Low Energy compatible device. These commands include Up, Down, Left, Right and Enter.
The directional commands are produced by the joystick while the enter command in initiated by the
push button.
↵ Push button = Return
Beacon API for developers:
LED Control
LED control is by writing the following byte parameter value as follows;
UUID: 0xFFF1
Handle: 0x0025
Read/Write value: 0xAB
Where A is composed of the following bits;
LED Control
LED control is by writing the following byte parameter value as follows;
UUID: 0xFFF1
Handle: 0x0025
Read/Write value: 0xAB
Where A is composed of the following bits;
1
– Green
2
– Red
4
– Yellow
And B is any one of;