CaptionCall LLC CR2 Benutzerhandbuch

                                                                                                          CR2    AC750 Wireless Dual-Band Router 

 

22

There are eight submenus under the Wireless 5G menu: Basic, Advanced, Security, 

Access Control, WDS, Site Survey, WPS, Schedule. Click any of them, and you will be 

able to configure the corresponding function. 

This page is used to configure the parameters for wireless LAN clients which may connect to 

your Access Point. Here you may change wireless encryption settings as well as wireless 

network parameters.

 

 

Disable Wireless LAN Interface: Check this box to to disable the router’s wireless 

features; uncheck to enable it.     

Band: Select one mode from the following. The default is 5GHz (A+N+AC) mode.   

Mode: Support AP, Client, WDS and AP+WDS mode. 

SSID: SSID (Service Set Identifier) is the unique name of the wireless network.   

Channel Width: Select the channel width from the drop-down list.   

ControlSideband: This relates to the channel number used for your wireless network. An 

upper band represents higher channels and vice versa. 

Channel Number: Indicates the channel setting for the router. 

Broadcast SSID: Select "Enable" to enable the device's SSID to be visible by wireless 

clients. The default is enabled. 

WMM: It will enhance the data transfer performance of multimedia data when they’re 

being transferred over wireless network. 

Data Rate: Sets the maximum wireless data rate that your network will operate on. 

Associated Clients: You can see the MAC Address, MAC address, transmission and 

reception packet counters for each associated wireless client.