SENWA MEXICO S.A.DE C.V S906 Benutzerhandbuch
2
1.2 Getting Started
1.2.1 Installation
Inserting or removing the SIM card
1.
Insert the SIM card before dialing, insert or remove the
SIM card and then remove the battery before shutdown．
2.
Locate the SIM card slot position, the SIM card with its gold
contacts facing down, along the direction of the SIM card into
the slot, respectively．
Inserting or removing an SD card
1.
Locate the SD card slot location, the SD card metal contacts
facing down, along the direction of the SD card into the slot.
2.
To remove the SD card，to launch．
Do not insert or remove the SD card, otherwise it will cause the
phone to reboot．
Before removing the SD card, make sure that the SD card has been
uninstalled. Otherwise, the card data and the card may be
damaged．
phone to reboot．
Before removing the SD card, make sure that the SD card has been
uninstalled. Otherwise, the card data and the card may be
damaged．
Battery Charging
Are connected to the battery charger to the phone and socket．
In order to reduce power consumption and energy waste, when
battery is fully charged, disconnect the charger; WLAN, GPS,
Bluetooth, and run in the background when you close the program
is idle; shorten the backlight time, etc.
battery is fully charged, disconnect the charger; WLAN, GPS,
Bluetooth, and run in the background when you close the program
is idle; shorten the backlight time, etc.
1.2.2 Boot
Press the power button until the phone is switched on. Wait for
about 2 seconds the screen will be lit．
about 2 seconds the screen will be lit．
1.2.3 Shutdown
Press the power button until the device options, select
Shutdown．
Shutdown．
1.3 Main Screen