ASA Electronics WVOM74Q Benutzerhandbuch
Pairing camera(s)
When you install an extra camera or if the monitor doesn’t detect it, please use this feature
to pair the camera with the monitor.
IMPORTANT:
Before pairing the camera, make sure camera power cord is well connected to a
constant 12-24V DC power source. Please refer to the With battery pack section and
follow the instruction in the Installing the Camera chapter to install the camera
properly.
Example: If you want to pair a new camera to channel 3, please follow the steps below:
to pair the camera with the monitor.
IMPORTANT:
Before pairing the camera, make sure camera power cord is well connected to a
constant 12-24V DC power source. Please refer to the With battery pack section and
follow the instruction in the Installing the Camera chapter to install the camera
properly.
Example: If you want to pair a new camera to channel 3, please follow the steps below:
1. Press
(MENU button) to choose the channel 3 in the Pair CAM function and
start the pairing process.
2. System will count down within 60 seconds, system message as shown:
3. Within 60-second count down, press the Link Key on the camera cable