ISAW Camera Inc. IEXR100 Benutzerhandbuch

Step#2. Standby

Press 'MODE' button for 2 seconds.
RC is standby to connect.

Step#3. Connect

Press 'MODE and SHUTTER' buttons together for 2 seconds.
RC starts to connect to the camera.

Step#4. Connected

RC is connected to the camera.

Step#5. Status

RC shows the status of multi camera control status.
Control number is the number of camera currently connected
Total cam is the total number of connected cameras.

Step#6. Mirroring

After RC is connected, LCD mirrors the camera's status.
User can monitor camera's status through RC LCD
simultaneously.

* Connection failed

WiFi connection is failed.
Goes back to standby screen.

* Exceed connection

Total number of connection is exceeded.
Disconnect the camera in order to replace the connection
* ISAW RC can control maximum 9 cameras at the same time

*Unstable connection

WiFi is connected but signal is unstable.
Check the camera's WiFi signal status
Properly disconnect WiFi connection from the camera

5. How to disconnect WiFi (De-pairing)

Steps

Image

Description

Step#1.Connected

Currently connected to the camera

Step#2. Disconnect

Press 'MODE and CAMERA' buttons together for 2 seconds.
RC starts to disconnect from the camera.

Step#4. Disconnected

RC is now disconnected from the camera.

Step#5. Standby

RC is back to standby mode.

Step#6.Connect
Other Cam

If there is other connected camera to the RC, it will automatically
connect to other camera.
(Camera #2 is disconnected, and RC is now connected to
camera #3)