Qolsys Inc. QS-IQPANEL2 Benutzerhandbuch
GETTING STARTED
Let’s start by connecting your power.
(note: if your panel has been professionally installed, skip this page)
Plug in the power connector
Route the wire behind the
retainer clip
retainer clip
Insert the wire into the strain-
relief
relief
Now let’s put on your cover and attach the table stand.
Place the top of the cover onto
the panel’s back plate
the panel’s back plate
Push the cover down until it
snaps in place
snaps in place
Insert the table stand into the
mounting holes and push upward
until it snaps into place
mounting holes and push upward
until it snaps into place
Plug in your panel, power it on
Plug in the power supply
provided with your panel
provided with your panel
Push and hold the standby
button on the side of the panel
for 3 seconds
button on the side of the panel
for 3 seconds
Once the panel powers up, the
home screen will appear.
home screen will appear.