Qolsys Inc. QS1100 Benutzerhandbuch
IQ DOOR/WINDOW- INSTALLATION MANUAL
QOLSYS CONFIDENTIAL AND PROPRIETARY PAGE 3 OF 6
© Last revised 2/27/15 All rights reserved
MOUNTING WITH PROVIDED ADHESIVE
•Remove
the
back
of
the
sensor
by
pressing
on
the
tab
and
pulling
the
cover
off
•Place the base of the sensor on the appropriate surface and
•Place the base of the sensor on the appropriate surface and
use
4
of
the
supplied
screws
to
secure
the
mounJng
plate
to
the
chosen
locaJon
•To secure the magnet, remove the mounJng plate by
•To secure the magnet, remove the mounJng plate by
prying
it
off
the
magnet
casing.
•Be sure the arrows on the top of the casing align with the
•Be sure the arrows on the top of the casing align with the
arrows
on
the
sensor
casing.
The
sensor
and
magnet
should
not
be
mounted
more
than
0.4
inches
apart.
•Use the 2 remaining screws provided to secure the magnet
•Use the 2 remaining screws provided to secure the magnet
mounJng
plate
in
the
proper
locaJon.
Clip
the
magnet
casing
back
into
place
once
the
plate
is
secure.
MOUNTING WITH PROVIDED HARDWARE
Push
to
remove
sensor
cover
•Remove
backing
on
one
side
of
the
large
double-‐sided
tape
and
sJck
the
exposed
side
on
the
back
of
the
sensor
as
shown.
•Remove the other side of the large double-‐sided tape and mount the
•Remove the other side of the large double-‐sided tape and mount the
device
according
to
the
installaJon
instrucJons
•Remove the backing one side of the small double-‐sided tape and place on
•Remove the backing one side of the small double-‐sided tape and place on
back
of
magnet
•Lineup the magnet with the sensor using the arrows shown on each device
•Lineup the magnet with the sensor using the arrows shown on each device
respecJvely.
Ensure
the
sensor
and
magnet
are
not
separated
more
than
0.4
inches
as
shown.
•Remove the second side of the double-‐sided tape and secure the magnet.
•Remove the second side of the double-‐sided tape and secure the magnet.