NEOLAB CONVERGENCE NWP-F50 Benutzerhandbuch

Copyright©2017 NeoLAB Convergence Inc.

1. How to use Neo smartpen

(1) Charging the pen 

•

 Make sure to charge the product after the purchase as it may have low battery.  

•

 The LED lamp will turn red while the battery is being charged. Once charging is complete, 

it’ll change back to green.

(If the battery is being charged with PC, PC will recognize the pen 

as a removable disk an the LED light turns violet.)

(2) Power ON/OFF 

•

 If you press the power button or put the pen tip on the paper, the pen will be activated

with LED lights on within a second.

(The Auto Power function is enabled when the pen is first

connected to the App. You can change the setting in the App.)

•

 When the power is on, hold the power button for more than 2 seconds, and the power

will turn off with flashing LED lights.

•

 If there is no action taken for more than 20 minutes, the power will be turned off automatically.

(You can change the auto-power-off time in the setting. The longer auto-power-off time is set, 

the shorter pen usage time is available.)

•

  If you do not use this product for more than 10 seconds, it will automatically change to 

standby (low power consumption) mode to reduce battery power consumption.

(3) How to grip 

The recognition rate is heavily affected by the direction of the optical sensor’s angle. 

Sensor(oval shaped part adjacent to the pen tip) should face downwards. Deviating

from the appropriate degree, or holding the pen in the wrong direction could cause

difficulties with capturing your writing or drawing.

Usage Angle

Hold the pen that does not cause 

pressure on the wrist and maintain a 

natural writing angle. 

Allowable Recognition Angle

Product’s acceptable recognition 

angle is -20° ~ +40°. 

(90° vertical standard) 

2. Neo Notes App 

•

 Smartpen works in tandem with mobile app “Neo Notes”

•

 The app can be downloaded from Google play or Applie app store.

•

 Please search for ‘Neo Notes’, ‘Neo smartpen’ in the search bar to find the App 

4. Using without app connection

• Neo smartpen can be used when the mobile app is not running. 
• The content that you write while the mobile app is off will be transferred
   later when the app and Neo smartpen are connected

Enable the Bluetooth function of the smart device.  

Run Neo Notes and tap the ‘Pen Register Now’ button below.
Please follow the instructions as shown in the app. 

If the pen has been successfully registered, the Pen Registration screen 

appears in the App.  Now, press ‘Start Neo Notes’ button and start

writing on N notebooks.

3. Registering Smartpen to mobile app  

5.  How to use Neo Notes

Place long tap on the notebook that you wish to lock, 
then ‘Share’,’Lock’ & ‘Delete’ button will appear
Select ‘Lock’ button to move your notebook to NoteBox
You can unlock the notebooks anytime. 

(1) NoteBox

• Use notebook “Lock” function if you want to use the same type

   of notebooks for multiple times.

(4) LED color status display 

(1)

Dimming : 

Indicates slowly getting dark and then bright while flashing.

(2)

Check if there’s any dirt around optical sensor or on papers.

Status

LED Color

         illuminating

        

         illuminating

              illuminating and thenturned OFF

Flashing

         illuminated
         Flashing

Flashing

Flashing

illuminated (with alarms)

-

-

(1)

Dimming

Power ON

Power OFF

Being charged

Fully charged

Low battery power notification

During USB connection

Bluetooth connection standby

During App connection

Low storage notification
During firmware update
Firmware update failure

(2)

Verify optical sensor or usage environment

(1)

Dimming

(1)

Dimming