S.E.M. INDUSTRIES SEM-TT9311 Benutzerhandbuch
OPERATING INSTRUCTIONS
LEATHERETTE BRIEFCASE
TURNTABLE
MODEL : TT-9311-BTM3EJ
MP3
DIGITAL
PLAYBACK
USB
FLASH MEMORY
MP3 PLAYBACK
E-2
WARNING:
- TO PERVENT FIRE OR SHOCK HAZARD,DO NTO EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE.
- TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE
COVER.
- TO PERVENT FIRE OR SHOCK HAZARD,DO NTO EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE.
- TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE
COVER.
IMPORTANT SAFETY INSTRUCTIONS
1.READ INSTRUCTIONS-AII THE SAFETY AND OPERATING INSTRUCTIONS
SHOULD BE READ BEFORE THE APPLIANCE IS OPERATED.
2.RETAIN INSTRUCTIONS-THE SAFETY AND OPERATING INSTRUCTIONS
SHOULD BE RETAINED FOR FUTURE REFERENCE.
3.HEED WARNIGS-ALL WARNINGS ON THE APPLIANCE AND IN THE
OPERATING INSTRUCTIONS SHOULD BE ADHERED TO.
4.FOLLOW INSTRUCTIONS-ALL OPERATION AND USE INSTRUCTIONS
SHOULD BE FOLLOWED.
5.WATER AND MOISTURE - THE APPLIANCE SHOULD NOT BE USED
NEAR WATER;FOR EXAMPLE NEAR A BATHTUB, WASHBOWL,KITCHEN
SINK,LAUNDRY TUB,IN A WET BASEMENT OR NEAR A SWIMMING POOL
AND THE LIKE.
6.CARTS AND STANDS - THE APPLIANCE SHOULD BE USED ONLY WITH
A CART OR STAND THAT IS RECOMMENDED BY THE MANUFACTURER.
AN APPLIANCE AND CART COMBINATION SHOULD BE MOVED WITH
CARE. QUICK STOPS,EXCESSIVE FORCE AND UNEVEN SURFACES
MAY CAUSE THE APPLIANCE AND CART COMBINATION TO OVERTURN.
7.WALL AND CEILING MOUNTING - THE APPLIANCE SHOULD BE MOUNTED
TO A WALL OR CEILING ONLY AS RECOMMENDED BY THE MANUFACTURER.
8.VENTILATION - THE APPLIANCE SHOULD BE SITUATED SO THAT IS
LOCATION OR POSITION DOES NOT INTERFERE WITH ITS PROPER V
ENTILATION . FOR EXAMPLE, THE APPLIANCE SHOULD NOT BE SITUATED
ON A BED, SOFA, RUG OR SIMILAR SURFACE THE MAY BLOCK THE
VENTILATION OPENINGS;OR PLACED IN A BUILT - IN INSTALLATION SUCH
AS A BOOKCASE OR CABINET THAT MAY IMPEDE THE FLOW OF AIR
THROUGH THE VENTILATION OPENINGS.
9.HEAT - THE APPLIANCE SHOULD BE SITUATED AWAY FROM HEAT SOURCES
SUCH AS RADIATORS, HEAT REGISTERS, STOVES OR OTHER APPLIANCES
(INCLUDING AMPLIFIERS)THAT PRODUCE AWAY FROM HEAT.
10.POWER SOURCES - THE APPLIANCE SHOULD BE CONNECTED TO A POWER
SUPPLY ONLY OF THE TYPE DESCRIBED IN THE OPERATING INSTRUCTIONS
OR AS MARKED ON THE APPLIANCE.
11.GROUNDING OR POLARIZATION - PRECAUTIONS SHOULD BE TAKEN SO
THAT THE GROUNDING OR POLARIZATION MEANS OF AN APPLIANCE IS
NOT DEFEATED.
12.POWER - CORD PROTECTION - POWER SUPPLY CORDS SHOULD BE
ROUTED SO THAT THEY ARE NOT LIKELY TO BE WALKED ON OR PINCHED
BY ITEMS PLACED UPON OR AGAINST THEM, PAYING PARTICULAR
ATTENTION TO CORDS AT PLUGS, CONVENIENCE RECEPTACLES AND THE
POINT WHERE THEY EXIT FROM THE APPLIANCE.
1.READ INSTRUCTIONS-AII THE SAFETY AND OPERATING INSTRUCTIONS
SHOULD BE READ BEFORE THE APPLIANCE IS OPERATED.
2.RETAIN INSTRUCTIONS-THE SAFETY AND OPERATING INSTRUCTIONS
SHOULD BE RETAINED FOR FUTURE REFERENCE.
3.HEED WARNIGS-ALL WARNINGS ON THE APPLIANCE AND IN THE
OPERATING INSTRUCTIONS SHOULD BE ADHERED TO.
4.FOLLOW INSTRUCTIONS-ALL OPERATION AND USE INSTRUCTIONS
SHOULD BE FOLLOWED.
5.WATER AND MOISTURE - THE APPLIANCE SHOULD NOT BE USED
NEAR WATER;FOR EXAMPLE NEAR A BATHTUB, WASHBOWL,KITCHEN
SINK,LAUNDRY TUB,IN A WET BASEMENT OR NEAR A SWIMMING POOL
AND THE LIKE.
6.CARTS AND STANDS - THE APPLIANCE SHOULD BE USED ONLY WITH
A CART OR STAND THAT IS RECOMMENDED BY THE MANUFACTURER.
AN APPLIANCE AND CART COMBINATION SHOULD BE MOVED WITH
CARE. QUICK STOPS,EXCESSIVE FORCE AND UNEVEN SURFACES
MAY CAUSE THE APPLIANCE AND CART COMBINATION TO OVERTURN.
7.WALL AND CEILING MOUNTING - THE APPLIANCE SHOULD BE MOUNTED
TO A WALL OR CEILING ONLY AS RECOMMENDED BY THE MANUFACTURER.
8.VENTILATION - THE APPLIANCE SHOULD BE SITUATED SO THAT IS
LOCATION OR POSITION DOES NOT INTERFERE WITH ITS PROPER V
ENTILATION . FOR EXAMPLE, THE APPLIANCE SHOULD NOT BE SITUATED
ON A BED, SOFA, RUG OR SIMILAR SURFACE THE MAY BLOCK THE
VENTILATION OPENINGS;OR PLACED IN A BUILT - IN INSTALLATION SUCH
AS A BOOKCASE OR CABINET THAT MAY IMPEDE THE FLOW OF AIR
THROUGH THE VENTILATION OPENINGS.
9.HEAT - THE APPLIANCE SHOULD BE SITUATED AWAY FROM HEAT SOURCES
SUCH AS RADIATORS, HEAT REGISTERS, STOVES OR OTHER APPLIANCES
(INCLUDING AMPLIFIERS)THAT PRODUCE AWAY FROM HEAT.
10.POWER SOURCES - THE APPLIANCE SHOULD BE CONNECTED TO A POWER
SUPPLY ONLY OF THE TYPE DESCRIBED IN THE OPERATING INSTRUCTIONS
OR AS MARKED ON THE APPLIANCE.
11.GROUNDING OR POLARIZATION - PRECAUTIONS SHOULD BE TAKEN SO
THAT THE GROUNDING OR POLARIZATION MEANS OF AN APPLIANCE IS
NOT DEFEATED.
12.POWER - CORD PROTECTION - POWER SUPPLY CORDS SHOULD BE
ROUTED SO THAT THEY ARE NOT LIKELY TO BE WALKED ON OR PINCHED
BY ITEMS PLACED UPON OR AGAINST THEM, PAYING PARTICULAR
ATTENTION TO CORDS AT PLUGS, CONVENIENCE RECEPTACLES AND THE
POINT WHERE THEY EXIT FROM THE APPLIANCE.