Beijing InHand Networks Technology Co . Ltd. IR611S Benutzerhandbuch
32
The IR6x1's management port should never be mapped to the device port by this function.
3.4.7 MAC-IP Binding
If the default process in the basic setting of firewall is disabled, only hosts specified in MAC-IP can
have an access to outer net.
From the navigation tree, select Firewall >> MAC-IP Binding, then enter the “MAC-IP Binding”
page.
Table 3-4-7 Firewall - MAC-IP Binding Parameters
MAC-IP Binding (at most 20 MAC-IP Bindings can be set)
Function description: Configure MAC-IP parameters.
Parameters
Description
Default
MAC Address
Set the binding MAC address
00:00:00:00:00:00
IP Address
Set the binding MAC address
192. 168. 2. 2
Description
For recording the significance of each MAC-IP
binding configuration
binding configuration
N/A
3.5 QoS
Some applications bring convenience to users, but they also take up a lot of network bandwidth.
To ensure all LAN users can normally get access to network resources, IP traffic control function
can limit the flow of specified host on local network. QoS provides users with dedicated
bandwidth and different service quality for different applications, greatly improving the network
service capabilities. Users can meet various requirements of different applications.
QoS includes bandwidth control and IP bandwidth limits.
3.5.1 Bandwidth Control
Bandwidth control sets a limit on the upload and download speeds when accessing external
networks.