Char-Broil 4885637CB-R Benutzerhandbuch

will show “HHH”. 

1.  Once the meat probe has reached the desired internal temperature, a loud 

beeping alarm will sound and the        symbol will flash. The audible signal 
will be two beeps with one second of silence between beeps. 

2. Press “STOP” to silence the alarm signal. Note that the       symbol will 

continue to flash unless current temperature is below target temperature. 
The Alarm signal will silence itself after 30 seconds if the STOP button is not 
pressed.

3. If the current temperature falls below the target temperature, the alarm will 

silence itself. 

the minimum  display  temperature  (-10°C  /  14°F)  the  LCD 
will show “LLL”. 

maximum  display  temperature  (310°C  /  610°F)  the  LCD 

1.  Insert probe into the meat as described in 

2.  Press  and  hold 

3.  Press 

4.  Your  target  temperature  will  appear  on  the  LCD   

5.  The cooking alerts will sound as described above.
6.  Press any button to silence the alert.

target temperature mode.

•

•

The count-up and countdown timers operate independently 
of the temperature probe sensors. 
To set a count-up timer:

If  no  countdown  time  is  set  the  timer  will  act  as  a  count 
up timer.

To set a countdown time:
Use 
To start timer:
1.  Press 
2.  Press 
3.  Once paused, press  
4.  Once a countdown has fi nished, the unit will beep

Press

Press the Power button to illuminate the screen for 10 seconds.

•

•

•

•

•

•

•

•

To start timer:
1.  Press 
2.  Press 
3.  Once paused, press  
4.  Once a countdown has fi nished, the unit will beep

temperature mode. When in this mode, the meat icons 
will disappear.

desired temperature.

screen. Begin cooking.

Once cooking is fi nished, remove the probe using an 
oven mitt. 
Clean  the  probe  with  water  and  a  mild  detergent. 
To clean the main unit and sensor, wipe with a damp 
cloth.

The alert will silence itself after 30 seconds.

Do not subject the unit to excessive force, shock, dust,
temperature or humidity.
Do not cover the ventilation holes with any items such 
as newspapers, curtains etc.  
Do not immerse the unit in water. If you spill liquid over 
it, dry it immediately with a soft, lint-free cloth.
Do  not  clean  the  unit  with  abrasive  or  corrosive 
materials. 
Do  not  attempt to service this unit.
There are no user serviceable components.
Only  use  fresh  batteries.  Do  not  mix  new  and  old  
batteries.

Properly dispose  of old  batteries. be sure to Recycle

old batteries. 

Do not place unit in dishwasher. 

old batteries. 

 4 times repeatedly until you press the STOP button.

The timer display will also flash.

The alert will silence itself after 30 seconds.

 4 times repeatedly until you press the STOP button.
The timer display will also flash.

“OPERATION” section.

The  countdown  timer  will  count  up  to  23:59.59 sec. 

When  the  probe  temperature  exceeds  the 

  Press  and  hold 

 and 

to select the preferred temperature units.

When  the  probe  temperature  is below

 to set the countdown time.

 and 

 to begin.

 again to pause, 

 to begin.
 again to pause, 

  to  select  manual  target  

  to  return  to  automatic 

 to reset  to zero.

 to reset  to zero.

 to select your  

  

 NOTE 
the  contents  of  the  user  manual  are  subject  to  change 
without notice.

L x W x H

Weight (without 
batteries)

Temperature unit

Temperature 
Accuracy

Display temperature 
range

Signal frequency 
Power 

L x W x H

Weight (without 
batteries)

Transmission range

Power 

This  device  complies  with  Part  15  of  the  FCC  Rules. 
Operation is subject to the following two conditions: (1) This 
device  may  not  cause  harmful  interference,  and  (2)  This 
device  must  accept  any  interference  received,  including 
interference that may cause undesired operation.

  WARNING 
approved  by  the  party  responsible  for  compliance  could 
void the user’s authority to operate the equipment.
  NOTE 
comply with the limits for a Class B digital device, pursuant 
to Part 15 of the FCC Rules. These limits are designed to 
provide reasonable protection against harmful interference 
in a residential installation.
This  equipment  generates,  uses  and  can  radiate  radio 
frequency  energy  and,  if  not  installed  and  used  in 
accordance  with  the  instructions,  may  cause  harmful 
interference  to  radio  communications.  However,  there  is 
no guarantee that interference will not occur in a particular 
installation.  If  this  equipment  does  cause  harmful 
interference to radio or television reception, which can be 
determined by turning the equipment off and on, the user 
is encouraged to try to correct the interference by one or 
more of the following measures:

•
•

•

•

The following information is not to be used as contact for 
support or sales. Please call our customer service number 

(listed on our website at 

We
Name: 
Address: 
 
Telephone No.:

1-800-241-7548

declare that the product 
Product No.: 

4885637

Product Name: 

Wireless Multi-Sensor Thermometer 

Manufacturer: 

SunYan 

Address: 
 
 

Reorient or relocate the receiving antenna.
Increase  the  separation  between  the  equipment  and 
receiver.
Connect  the  equipment  into  an  outlet  on  a  circuit 
different from that to which the receiver is connected.
Consult  the  dealer  or  an  experienced  radio  /  TV 
technician  for help.

 The technical specifi cations for this product and 

  This  equipment  has  been  tested  and  found  to 

  Changes  or  modifi cations  not  expressly 

Char

-Broil

1442 Belfast Avenue
Columbus, Ga 31902 USA

NO. 2, 7th South Street, QingGong Road 3
FoShan City, GuangDong, P.R. China

120 x 60 x 26.5 mm 
(4.72 x 2.36 x 1.04 in)

75g (2.6 oz)

°C / 

1.6

-10
(14
915MHz
2 x UM-4 AAA 1.5 V batteries

70 x 91 x 56 mm
(2.7 x 3.6 x 2.2 in)

50 g (1.75 oz) 

33 m (100 ft) unobstructed

2 x UM-4 AAA 1.5V batteries 

www.c

. harbroil.com, for all inquiries.)

°F

°C (3

°C - 321

°F - 610

°F)

°C

°F)

(70°F - 210°F)