CEI Conrad Electronic International Limited RCE-ONE-CAMTX Benutzerhandbuch

Version 

08/13

Dear customer, 
Thank you for making the excellent decision to purchase this RC Logger® product. You now have 

a high-quality product with a name that represents outstanding products. 
This product complies with the applicable National and European standards and regulations. We 

kindly request the user to follow the operating instructions, to preserve this condition and to ensure 

safe operation! These operating instructions relate to this product. They contain important notices 

on commissioning and handling. Please take this into consideration when you pass the product on 

to third parties. Please keep these instructions for further reference! 
All company names and product designations contained herein are trademarks of the respective 

owners. All rights reserved. 
We wish you a great deal of enjoyment with your new RC Logger® product!

The model “RC EYE OneCam TX” is a light-weight wireless camera, equipped with a CMOS image 

sensor and 5.8 GHz wireless AV transmitting technology. 
The camera is solely designed to be used in a model making environment and shall never be 

used for surveillance purposes of any kind. The camera shall only be used in dry locations and 

environments. The product must not become damp or wet. This product is not a toy and not suitable 

for children under 14 years of age.

For safety and approval purposes (CE), you must not rebuild and/or modify this product. If you 

use the product for purposes other than those described above, the product may be damaged. In 

addition, improper use can cause hazards such as short circuiting, fire, electric shock etc. Read 

the instructions carefully and keep them. Make this product available to third parties only together 

with its operating instructions.

1 x RC EYE OneCam TX

2 x Double sided tape (30 x 8 mm)

Operating instructions

Read the operating instructions carefully and especially observe the safety information. If you do 

not follow the safety instructions and information on proper handling in this manual, we assume 

no liability for any resulting personal injury or damage to property. Such cases will invalidate the 

warranty/guarantee.

 

> You must strictly adhere to national laws governing the use of such camera devices. Misuse may 

result in legal prosecution.

 

> The device is not a toy. Keep it out of the reach of children and pets.

 

> Do not leave packaging material lying around carelessly. These may become dangerous playing 

material for children.

 

> Protect the product from extreme temperatures, direct sunlight, strong jolts, high humidity, 

moisture, flammable gases, vapours and solvents.

 

> Do not place the product under any mechanical stress.

 

> If it is no longer possible to operate the product safely, take it out of operation and protect it from 

any accidental use. Safe operation can no longer be guaranteed if the product:

 - is visibly damaged,
 - is no longer working properly,
 - has been stored for extended periods in poor ambient conditions or
 - has been subjected to any serious transport-related stresses.

 

> Please handle the product carefully. Jolts, impacts or a fall even from a low height can damage 

the product.

 

> Also observe the safety and operating instructions of any other devices which are connected 

to the product.

 

> Not following the instructions in these operating instructions may result in dangers such as short 

circuit, fire, electric shock, etc. Observe the safety information under all circumstances! 

 

> Consult an expert when in doubt about operation, safety or connection of the device.

 

> Maintenance, modifications and repairs are to be performed exclusively by an expert or at a 

qualified shop.

 

> If you have questions which remain unanswered by these operating instructions, contact our 

technical support service or other technical personnel.

1
2

3

4

5
6

7

1  Female connector (Connects to “RC EYE One S” battery)
2  Power board
3  Male connector (Connects to “RC EYE One S”)
4  Antenna
5  Dip switches
6  Main camera
7  Camera lens
Not shown: Double sided tape

 Fig. 1

 Fig. 2

1.  Carefully slide the camera out of the antistatic bag. 
2.  Put your “RC EYE One S” quad-copter on a clean and stable surface.
3.  Connect the male connector (3) of the camera to the female input port on the “RC EYE One S”.
4.  Put the battery in place as usual. Secure the battery including, power board (2) and camera 

cables with the Velcro

®

 strap (see Fig. 1). attention! It is very important to ensure the cables 

cannot be caught and entangled while the rotors are in motion. Do not establish the power 

connection yet!

5.  Clean the canopy top with a damp cloth and little diswashing liquid. Take care that no water 

enters the product! Dry the canopy top. 

6.  Peel off the protective foil on one side of the double sided tape.
7.  Stick the double sided tape along the middle axis on the canopy top (The camera lens (7) 

shall eventually sit between the two red propellers). Peel off the remaining protective foil of the 

double sided tape.