eResearchTechnology GmbH AM3G03 Benutzerhandbuch
Page 21/40
Version 01.00 • Date 25JAN2018
When the battery is low (at approx. 5%), the following message will be displayed:
The internal clock will stop after about
5 days when the internal battery is
fully discharged.
5 days when the internal battery is
fully discharged.
At this point of discharge you have 24 hours to
connect the AM3 to the power supply before the
battery is fully discharged.
connect the AM3 to the power supply before the
battery is fully discharged.
OK
ESC
How to charge the battery
Plug one end of the wall adapter into the
USB interface of the AM3 and the other
end into a wall socket.
Plug one end of the wall adapter into the
USB interface of the AM3 and the other
end into a wall socket.
Only the original power supply
delivered with the AM3 must be
used for charging the device.
delivered with the AM3 must be
used for charging the device.
If you switch on the AM3 while the plug-in power supply is connected, the following
message will be displayed:
message will be displayed:
The battery symbol indicates the state of charge.
OK
ESC
To perform a session, please
disconnect any cables from the AM3.
disconnect any cables from the AM3.