Shenzhen Honeycomb Technologies Company Limited HBT40A18AN Benutzerhandbuch

Blue2™

www.ablenetinc.com

1-800-322-0956

PN 98000035 (08/18 Rev. B)

Custom Modes
Blue2 allows you to record custom key sequences to create a custom 
mode.
1.  Turn Blue2 on using the on/off switch.
2.  Plug a USB keyboard into the USB programming jack.
3.  Turn the learn switch to on by moving it to the left.
4.  Select Mode 4, 5, or 6.
5.  Activate Switch 1 to start recording mode. The S1 light will blink 

while in recording mode.

6.  Activate up to four keystrokes that you would like recorded to Switch 

1 on the USB keyboard.

7.  Activate Switch 1 to stop recording mode.  
8.  Activate Switch 2 to start recording mode.  The S2 light will blink 

while in recording mode.

9.  Activate up to four  keystrokes that you would like recorded to 

Switch 2 on the USB keyboard.

10.  Activate Switch 2 to stop recording mode.
11.  Turn the learn switch to off by moving it to the right.
12.  Remove USB keyboard.
13.  Select your new mode to use.

Pairing With A New Device
If Blue2 has already been paired with a device, you must first unpair it 
from the original device before it can be paired with a new device. To 
unpair, go into your devices Bluetooth settings, find the device named 
BLUE2, and choose to Forget This Device.  Or, hold down the Pair 
button on Blue2 and it will unpair.  You can now follow the Blue2 setup 
procedure to pair with the new device.

Battery Charging
Blue2 is powered by an internal rechargeable battery. Charge Blue2 to full 
power before using.

To charge:
1.  Select appropriate wall adapter for your region. 
2.  Insert micro USB portion of wall charger into the micro USB 

charging jack on Blue2 and plug wall adapter into wall outlet. 

3.  While charging the switch indicator lights S1 and S2 will blink on 

and off. When fully charged the switch indicator lights will remain lit.

Setup
1.  Turn Blue2 on using the on/off switch.
2.  Activate the pairing button on Blue2.
3.  In your devices Bluetooth

®

 settings select BLUE2.

4.  Activate the mode button on Blue2 to select a mode.
5.  Set up any settings for switch access within the app you will be 

using on your device.

6.  Blue2 is now ready for use with your device and app.

Note:  If your app does not work with a mode, try another mode.  If 
neither Mode 1, 2, or 3 work, contact your app developer to determine 
the keystrokes being used and then create a custom mode to 
accommodate your app.

Switch Use
Once setup, activate Switch 1 (white switch top) or Switch 2 (orange 
switch top) to use with an app.  

If you would like to use one or two external switches with Blue2, insert the 
3.5mm switch plug of the external switch into switch jack S1 or switch 
jack S2. The external switch will now control the app on your device.

Use Modes
Blue2 is preprogrammed with three modes of operation to accommodate 
the standard protocols used for switch access to apps. In addition, a user 
can program their own custom sequence of keystrokes to modes 4, 5, 
and 6.
• 

Mode 1:  Space and Enter

• 

Mode 2:  1 and 3

• 

Mode 3:  ~1 and ~3

• 

Mode 4:  User defined

• 

Mode 5:  User defined

• 

Mode 6:  User defined 

Sleep Mode
After 30-minutes of inactivity, Blue2 will go into sleep mode. To wake 
from sleep mode, activate Switch 1 (white switch top) or Switch 2 (orange 
switch top) and wait approximately 7-seconds for Blue2 to re-pair with 
your device.

On-screen Keyboard
If using an iOS device with Blue2, activating the keyboard toggle button 
on Blue2 will bring up the on-screen keyboard.  To hide the on-screen 
keyboard activate the keyboard toggle button a second time.

Switch 1
(White)

Switch 2
(Orange)

On/Off
Switch

Mode Button

Learn
Switch

Switch Jack 1

Switch Jack 2

Micro USB
Charging Jack

USB
Programming
Jack

Keyboard
Toggle
Button

Pairing
Button

Mode
Indicator
Lights

Switch
Indicator
Lights