GOLD FINGERS TECHNOLOGY CO. LTD BTS02 Benutzerhandbuch
Thank you for purchasing the Bluetooth Speaker, we hope you
will enjoy all its benefits.
Please read this user's guide to get start, and to make the best
usage of the speaker's many features.
BEFORE USING YOUR speaker
Checking speaker compatibility
Your speaker is compatible with most Bluetooth mobile phones
that are compliant with Bluetooth version V2.1 and support the
headset and/or hands- free profile(s). Ensure that your phone
has Bluetooth capability by visiting your phone manufacturer's
web site.
1) When the speaker is in low battery, the indicator will flash
red and tone as “battery low” once in a minute.
2)The speaker will be fully charged in approximately 4-5 hours.
3)Remove the USB cable from the PC socket
IMPORTANT: The speaker cannot be used while charging.
BASIC OPERATIONS
Turning Speaker on/off
1.To turn the speaker on
Switch the “on/off” Button to the left, you will hear a tone “power
on”. The speaker is now turned on.
2.To turn the speaker off
Switch the “on/off” Button to the right, you will hear a tone
“power off”. The speaker will be turned off.
3.When the speaker is on low battery, blue indicator will flash
red during standby mode and will voice for “battery low”. Please
charge the speaker.
Pairing
Pairing will create a unique and enciphered wireless link
between two Bluetooth enabled devices, such as your Bluetooth
phone and Bluetooth speaker.
1.Automatic pairing: The speaker will enter pairing mode
automatically after 5 seconds of turning on the speaker.
2. Manual paring: the speaker is on standby mode or playing
mode. Press and hold the “ ” Button for about 5 seconds
until the indicator light alternately flashes blue and red. You will
hear a tone “pairing”, which means the speaker has been in
pairing mode.
3. Set your Bluetooth phone to discover the speaker by
following your phone's guide. Typically, the steps involve going
to a ‘Setup’, 'Connect', or ‘Bluetooth’ menu on your phone and
then selecting the option to discover Bluetooth devices.
4. Your phone will find the speaker and ask if you want to pair
with it. Confirm this by pressing the “Yes” or “OK” key.
5. Enter a passkey or PIN code “0000” (4 zeros), then press the
“Yes” or “OK” key.
Note: If the Bluetooth version of your Bluetooth mobile phone is
V2.1, you will not need to enter a Passkey (Pin code) during
above pairing process.
6.You will hear a tone “connected”, it means your phone has
been connected with the speaker.
IMPORTANT: If the pairing can’t be completed within 90
seconds while the pairing mode is activated, that means the
pairing is unsuccessful, please pairing manually.
Playing on/off
1.Make sure that your phone connected with the speaker.
2.Find music in your phone and play on, the song will be
playing from the speaker.
3.Press “ ” button when playing on, the song will be stop.
Changing music
When the speaker is playing on, short press “VOL-” or “VOL+”
button once to change music.
This feature may vary due to user’s operation mode and mobile
phone settings.
Adjust the volume
1.Long press “VOL-” to decrease the volume and you will hear
a beep when it is minimum
2.Long press “VOL+” to increase the volume and you will hear a
beep when it is maximum.
Making a call
Using the phone’s keypad
1.Dial number on the keypad or select the contact name from
the contact list of your mobile phone.
2.Press phone’s “send/call” key.
Ending a call
1.Shortly press “ ” Button once during a call.
2.End a call from phone’s keypad.
Answering a call
1.Press the “ ” button briefly, when you receiving an
incoming call.
Crash and reset
Connected PC with speaker and press “ ” & “VOL+” button
once to reset the speaker.
Product Specifications
Bluetooth Compliance: Bluetooth Version2.1 Specifications
Support Bluetooth HSP, HFP, A2DP and AVRCP Profiles
Multipoint A2DP connection
Wire audio support (line in)
Play time: 6-8 hours
Talk time: 8 hours
Standby Time: 500 hours
Speaker output power: 3W*1
Wight: 200g
Size: 75*75*52mm
Support iPhone battery indication
Range: 10M
Frequency responds range: 100Hz~20 kHz
*Depending on the phone type and usage, the actual time may
vary.
Correct disposal of this product
(Waste Electrical & Electronic Equipment)This marking
shown on the product or its literature, indicates that it should not
be disposed with other household wastes at the end of its
working life.
To prevent possible harm to the environment or human health
from uncontrolled waste disposal, please separate this from
other types of wastes and recycle it responsibly to promote the
sustainable reuse of material resources. Household users
should contact either the retailer where they purchased this
product, or their local government office, for details of where
and how they can take this item for environmentally safe
recycling. Business users should contact their supplier and
check the terms and conditions of the purchase contract. This
product should not be mixed with other commercial wastes for
disposal.
Bluetooth® is a trademark owned by Bluetooth SIG, Inc.
Charging the speaker
Your speaker uses a rechargeable battery. You must charge
the battery fully before using the speaker for the first time.
1.Plug the USB Cable into PC socket.
2. Connect the USB Cable with speaker as it shown on the
picture. The red indicator of speaker will turn on when charging.
3. When the battery is fully charged, the red indicator will turn
blue
Bluetooth Speaker
BTS02 User Manual
Playing on/off
PREV/ VOL-
NEXT/ VOL+