Zhongshan Yinli Electronics Co. Ltd VS-86M Benutzerhandbuch
Playing Music in Bluetooth Mode
1. Turn the Speaker ON by sliding the ON/OFF switch to the ON position. When the upper indicator light of the top flashes
blue, it means the unit is ready to “pair” and is waiting for phone and speaker to connect. Activate the Bluetooth
function of the phone and search for a Bluetooth device.
function of the phone and search for a Bluetooth device.
2. Select the Bluetooth device named “Valore‐BTS309” and tell it to “pair”. If the phone requests you to enter a
password, please enter “0000” and confirm the connection. After the phone shows “Connection successful”, the LED will
stop fast flashing and will turn slow flashing. You can now play music from your Music player. (For some phones, it will
show “Connection failed”, don’t worry, it may actually have connected, so try playing music. If you cannot play music,
retry” paring” the phone to the speaker.)
stop fast flashing and will turn slow flashing. You can now play music from your Music player. (For some phones, it will
show “Connection failed”, don’t worry, it may actually have connected, so try playing music. If you cannot play music,
retry” paring” the phone to the speaker.)
Playing Music in Line in Mode
1. Connect the 3.5MM audio input plug to the unit, and then insert the other side of 3.5mm plug into the audio
output socket of the music source, such as a mobile phone, projector, laptop, MP3 player, CD/DVD etc.
2. Turn on the unit by sliding the switch to the "ON" position. The upper indicator light of the top will turn steady blue,
play music from your audio player.
play music from your audio player.
Usage of function key under different mode
|<</V‐
>>|/V+
Touch
momently
Touch and
hold
Touch momently
Touch and
hold
Touch
momently
Touch and
hold
Bluetooth
Previous
Volume down
Pause/Play, answer/end the
phone
phone
Disconnect with
Bluetooth
Next
Volume up
LINE IN
N/A
Volume down
N/A
N/A
N/A
Volume up
LINE IN and
Bluetooth
N/A
Volume down
Switch mode between
Bluetooth and Line in,
answer/end the phone
Disconnect with
Bluetooth
N/A
Volume up
Remark:
1. When the mobile phone is ringing, touch
momently
to answer the call, and speak through the Microphone.
Touch
momently again
to end the call, then the speaker will go on with playing the music.
2. When touching the function key, the other LED light will turn blue to indicate that your touching is efficient.
Warm Reminder:
1. When you increase the volume to the maximum, you will hear a warning voice.
2. When you touch the key successfully, the below indicator light of the top will turn blue.
3. It is normal for the speaker to get slightly warm after prolonged use or high volume usage.