Cyrus Audio Ltd. JG10 Benutzerhandbuch
Cyrus 6
DAC
, Cyrus 8
DAC
, Cyrus 8
Qx DAC
User Instructions
9
MC-bUS System
Connecting the MC-BUS sockets b in an MC-bus system
provides unified system control.
External Power Supply - PSX-R
(Cyrus 8
DAC
, Cyrus 8 Qx
DAC
)
The PSX-R is a unique dC power supply which will upgrade
the sonic performance of your amplifier. When an amplifier
/ PSX-R combination is installed, analogue and signal related
sections of the amplifier are powered from this clean,
stable power source while other requirements are supplied
internally. This ensures complete isolation of control circuits
and sensitive analogue sections reducing AC mains-borne
noise and power supply ripple.
To connect the PSX-R to the amplifier, disconnect both
To connect the PSX-R to the amplifier, disconnect both
components from the mains, then plug the connector on
the umbilical cord of the PSX-R into the Multi-Pole socket
on the rear of the amplifier. You will need a mains supply
for both units.
NOTE: Connection of a PSX-R is detected automatically by
NOTE: Connection of a PSX-R is detected automatically by
the amplifier, so no internal adjustments are required.
Cyrus Tuner
Cyrus Power Amplifier
Cyrus CD player
Cyrus amplifier
MC-BUS out
MC-BUS out
MC-BUS out
MC-BUS out
MC-BUS in
MC-BUS in
MC-BUS in
MC-BUS in
An
MC-bus
loop
is
established by connecting
single phono cables from the
MC-BUS output of one unit to
the MC-BUS input of another
in a daisy-chain. Complete
the loop by returning the
MC-BUS output of the final
component to the MC-bus
input of the first.
With MC-BUS connection established you can control the
power function of the entire system from the front panel
or remote control. Selecting ‘CD’ from the front panel will
switch on the amplifier, the Cyrus power amplifier and a
Cyrus CD player. When the amplifier is set to Standby, the
entire system will also switch off.
When a Cyrus surround Processor is included in the MC-bus
When a Cyrus surround Processor is included in the MC-bus
loop, setting of the volume calibration level will take place
automatically when the ‘Cyrus AV’ input is selected. Refer
to the handbook for the Surround Processor for further
details.