Outform Ltd UM335 Benutzerhandbuch
Step 1. Remove the screw nut by hand
and remove the small screw with a
screwdriver from under the display table
and remove the threaded bolt.
and remove the small screw with a
screwdriver from under the display table
and remove the threaded bolt.
Step 2. Carefully lift the pedestal up
from the display table.
from the display table.
Step 3. Use a small rod, insert it into
the bottom of the pedestal press the
reset button and hold for three seconds
to erase the data from the staff and
manager cards.
the bottom of the pedestal press the
reset button and hold for three seconds
to erase the data from the staff and
manager cards.
Reset Switch
Page 6
Note: The switch is used to delete all data from the staff and management cards.