Cotton On USA Inc 136796 Benutzerhandbuch

FCC Information

FCC Radiation Exposure Statement

This equipment complies with the FCC RF radiation 

exposure limits set forth for an uncontrolled environment. 

This transmitter must not be co-located or operating in 

conjunction with any other antenna or transmitter.

This device complies with Part 15 of the FCC Rules, 

operation is subject to the following two conditions: 

(1) This device may not cause harmful interference, and 

(2) this device must accept any interference received, 

including interference that may cause undesired operation.

Warning: Changes or modifications to this unit not 

expressly approved by the party responsible for 

compliance could void the user’s authority to operate the 

equipment.

NOTE: This equipment has been tested and found to 

comply with the limits for a Class B digital device, pursuant 

to Part 15 of FCC Rules.

Slide the Off/On switch on the speaker to the ON position.

Press and hold the Bluetooth pairing button for 2 seconds. 

Tones will sound and the light will flash blue to indicate 

pairing attempt.

Place your audio device in Bluetooth mode (look in the 

device’s settings menu) and make it discoverable. 

‘Typo Mighty Speaker’ should appear on your device.

If  ‘Not Connected’,  ‘Not Paired’ or similar message appears,

select ‘Typo Mighty Speaker’ to connect. If prompted for a 

password, enter ‘1234’ on your device’s keypad.

Once paired, the light will glow solid blue and a 

confirmation beep will sound and you can then stream 

audio. If pairing is not successful, turn the power off on 

the speaker and repeat the pairing procedure.

To listen to Bluetooth audio in the future, slide the Off/On 

switch on the speaker to the ON position. The light will 

flash blue slowly as the speaker attempts to auto-link with 

the last previously linked unit in range (30 feet).

Control Bluetooth audio from your device. 

Remember to turn off the speaker and your device after 

listening.

NOTE: When unit is charging, the blue light will appear 

solid red.

Place the unit on a level surface away from sources of 

direct sunlight or excessive heat.

Protect your furniture when placing your unit on a natural 

wood and lacquered finish. A cloth or other protective 

material should be placed between it and the furniture.

Clean your unit with a soft cloth moistened only with mild 

soap and water

Do not use strong cleaning agents such as thinner or 

similar materials as they can damage the surface of the unit.

NOTE: 

When not in use, turn speaker OFF to save battery power.

Unit will automatically power down after 5 minutes if no 

audio or bluetooth stream is detected (you will then need 

to slide the power switch to OFF position.

WARNING

Lithium batteries can explode or cause burns if 

disassembled, shorted, recharged, exposed to water, fire, 

or high temperature & not handled appropriately

Do not place loose batteries in a pocket, purse, or other 

container containing metal objects, do not mix with used 

or other battery types, or store with hazardous or 

combustible materials.

Store in a cool, dry, ventilated area.

Follow applicable laws and regulations for transport and 

disposal.

When used in the directed manner, this unit has been 

designed and manufactured to ensure your personal 

safety. However, improper use can result in potential 

electrical shock or fire hazards. Please read all safety and 

operating instructions carefully before installation and 

use, and keep these instructions handy for future 

reference. 

Take note of following warnings;

Charge before use – must be fully charged.

Keep away from water, all liquids, moisture and heat.

This product must be well ventilated at all times.

This product should only be connected to a power supply 

as described in instructions.

This product should only be cleaned as recommended.

Keep unplugged from power source if not being used for 

a period of time.

If damaged this can only be repaired by a professional 

technician.

The speaker is powered by a rechargeable battery in the 

speaker. Make sure to charge the speaker before using.

Connect the micro-USB plug to the USB Charging jack on 

the speaker.

Connect the larger USB plug to USB AX adaptor or to a 

powered USB port, such as that on a computer. The light 

on the speaker will turn to solid red while charging and 

turn off when fully charged. When the red light flashes or 

if you start to notice sound distortion at higher volumes, 

it’s time to recharge the battery.

These limits are designed to provide reasonable protection 

against harmful interference in a residential installation. 

This equipment generates uses and can radiate radio 

frequency energy and, if not installed and used in 

accordance with the instructions, may cause harmful 

interference to radio communications. 

However, there is no guarantee that interference will not 

occur in a particular installation. If this equipment does 

cause harmful interference to radio or television reception, 

which can be determined by turning the equipment off 

and on, the user is encouraged to try to correct the 

interference by one or more of the following measures;

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and 

receiver.

Connect the equipment into an outlet on a circuit different 

from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician 

for help.

Folded Booklet

Each page is 70mm x 70mm